Huawei

Huawei Honor 4A SCL-CL00

Huawei_Honor_4A_SCL-CL00_C92B057_Board Software_China_Telecom_05021TPR_QFIL.zip
June 16, 2026 Huawei 1 GB Huawei

Huawei Honor 4A SCL-CL00 is a Huawei firmware file listed under Huawei, distributed as Huawei_Honor_4A_SCL-CL00_C92B057_Board Software_China_Telecom_05021TPR_QFIL.zip with a download size of 1 GB. It is built for Qualcomm-based devices. It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. This page has been viewed 25 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1 GB
Download Free

About Huawei Honor 4A SCL-CL00

The Huawei Honor 4A SCL-CL00 runs on Huawei's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Huawei Honor 4A SCL-CL00 a fresh start without the clutter that builds up over time. File Name: Huawei_Honor_4A_SCL-CL00_C92B057_Board Software_China_Telecom_05021TPR_QFIL.zip File Size: 1 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. After flashing, allow a few minutes for the first boot. From there the Huawei Honor 4A SCL-CL00 should run like a brand new unit.

File Details

File nameHuawei Honor 4A SCL-CL00
PackageHuawei_Honor_4A_SCL-CL00_C92B057_Board Software_China_Telecom_05021TPR_QFIL.zip
Brand / PlatformHuawei
CategoryHuawei
PlatformQualcomm
Flash toolQFIL (part of Qualcomm QPST)
Package formatZIP archive
File size1 GB
Date addedJune 16, 2026
PriceFree

How to flash Huawei Honor 4A SCL-CL00 with QFIL

  1. Confirm Huawei Honor 4A SCL-CL00 matches your exact device model and that it is intended for Huawei hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1 GB) using the button above and extract it on a Windows PC.
  4. Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
  5. In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
  6. Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
  7. Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.

Frequently asked questions

Is Huawei Honor 4A SCL-CL00 free to download?

Yes, Huawei Honor 4A SCL-CL00 can be downloaded free of charge from this page.

How large is the download?

The Huawei Honor 4A SCL-CL00 package is 1 GB.

Which tool do I need to flash Huawei Honor 4A SCL-CL00?

Huawei Honor 4A SCL-CL00 is Qualcomm firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.

Which devices is this firmware for?

This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.

More Huawei files

Back to Huawei