# Huawei Honor 4A SCL-CL00

> Huawei Honor 4A SCL-CL00 is a Huawei firmware file listed under Huawei, distributed as Huawei_Honor_4A_SCL-CL00_C92B057_Board Software_China_Telecom_05021TPR_QFIL.zip with a download size of 1 GB. It is built for Qualcomm-based devices. It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/huawei-honor-4a-scl-cl00-99700>

## File details

- **File name:** Huawei Honor 4A SCL-CL00
- **Package:** Huawei_Honor_4A_SCL-CL00_C92B057_Board Software_China_Telecom_05021TPR_QFIL.zip
- **Brand / platform:** Huawei
- **Category:** [Huawei](https://www.filefirmware.com/category/huawei)
- **Platform:** Qualcomm
- **Flash tool:** QFIL (part of Qualcomm QPST)
- **Package format:** ZIP archive
- **File size:** 1 GB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/huawei-honor-4a-scl-cl00-99700>

## About Huawei Honor 4A SCL-CL00

The Huawei Honor 4A SCL-CL00 runs on Huawei's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Huawei Honor 4A SCL-CL00 a fresh start without the clutter that builds up over time. File Name: Huawei_Honor_4A_SCL-CL00_C92B057_Board Software_China_Telecom_05021TPR_QFIL.zip File Size: 1 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. After flashing, allow a few minutes for the first boot. From there the Huawei Honor 4A SCL-CL00 should run like a brand new unit.

## How to flash Huawei Honor 4A SCL-CL00 with QFIL

1. Confirm Huawei Honor 4A SCL-CL00 matches your exact device model and that it is intended for Huawei hardware.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (1 GB) from the web page and extract it on a Windows PC.
4. Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
5. In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
6. Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
7. Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.

## Guides for this firmware

- [Huawei Firmware Guide: Finding and Flashing Stock ROMs](https://www.filefirmware.com/blog/huawei-firmware-guide-finding-and-flashing-stock-roms): To reflash or unbrick a Huawei device, you must identify the exact model number and chipset to find the compatible stock ROM. Depending on the hardware, you will typically use tools like SP Flash…
- [How to Get Qualcomm Phones into EDL Mode for QFIL](https://www.filefirmware.com/blog/how-to-get-qualcomm-phones-into-edl-mode-for-qfil): To get a Qualcomm-based phone into EDL (Emergency Download) mode for QFIL, you must trigger a specific boot state that allows the device to be recognized by your PC as a "Qualcomm HS-USB QDLoader…
- [How to Fix QFIL Sahara Fail Error](https://www.filefirmware.com/blog/how-to-fix-qfil-sahara-fail-error): The Sahara Fail error in QFIL occurs when the initial communication between the computer and the Qualcomm device fails. This prevents the tool from uploading the Firehose programmer, which is…

## Frequently asked questions

### Is Huawei Honor 4A SCL-CL00 free to download?

Yes, Huawei Honor 4A SCL-CL00 can be downloaded free of charge from its web page.

### How large is the download?

The Huawei Honor 4A SCL-CL00 package is 1 GB.

### Which tool do I need to flash Huawei Honor 4A SCL-CL00?

Huawei Honor 4A SCL-CL00 is Qualcomm firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.

### Which devices is this firmware for?

This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.

## More Huawei files

- [Huawei Y9 Prime STK-L22](https://www.filefirmware.com/file/huawei-y9-prime-stk-l22-100996) — 1 GB
- [Huawei Y9 Prime STK-L22HN](https://www.filefirmware.com/file/huawei-y9-prime-stk-l22hn-100985) — 3.31 GB
- [Huawei Y9 Prime STK-LX1](https://www.filefirmware.com/file/huawei-y9-prime-stk-lx1-100983) — 2.95 GB
- [Huawei Y9 Prime Stark-L21](https://www.filefirmware.com/file/huawei-y9-prime-stark-l21-100982) — 2.95 GB
- [Huawei Y9 Prime STK-LX2](https://www.filefirmware.com/file/huawei-y9-prime-stk-lx2-100981) — 1 GB
- [Huawei Y9 Prime Stark-L22B](https://www.filefirmware.com/file/huawei-y9-prime-stark-l22b-100978) — 3.54 GB
- [Huawei Y9 Prime STK-L21](https://www.filefirmware.com/file/huawei-y9-prime-stk-l21-100977) — 2.95 GB
- [Huawei Y9 Jackman-L22](https://www.filefirmware.com/file/huawei-y9-jackman-l22-100976) — 3.32 GB

---

*Source: File Firmware — <https://www.filefirmware.com/file/huawei-honor-4a-scl-cl00-99700>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
