Huawei

Huawei GR3 TAG-L22

Huawei_GR3_TAG-L22_MT6753_C567B128i_Firmware_Southeast_Asia_EMUI3.1_05021XLY_5.1.zip
June 16, 2026 Huawei 1.67 GB Huawei

Huawei GR3 TAG-L22 is a Huawei firmware file listed under Huawei, distributed as Huawei_GR3_TAG-L22_MT6753_C567B128i_Firmware_Southeast_Asia_EMUI3.1_05021XLY_5.1.zip with a download size of 1.67 GB. It is built for the MediaTek MT6753 chipset and runs Android 5.1 (Lollipop). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 16 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1.67 GB
Download Free

About Huawei GR3 TAG-L22

The Huawei GR3 TAG-L22 runs on Huawei's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Huawei GR3 TAG-L22 back to square one. File Name: Huawei_GR3_TAG-L22_MT6753_C567B128i_Firmware_Southeast_Asia_EMUI3.1_05021XLY_5.1.zip File Size: 1.67 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. When it finishes, the Huawei GR3 TAG-L22 restarts with clean factory software. Match the firmware to your variant and follow each step in order.

File Details

File nameHuawei GR3 TAG-L22
PackageHuawei_GR3_TAG-L22_MT6753_C567B128i_Firmware_Southeast_Asia_EMUI3.1_05021XLY_5.1.zip
Brand / PlatformHuawei
CategoryHuawei
ChipsetMediaTek MT6753
Android versionAndroid 5.1 (Lollipop)
Flash toolSP Flash Tool
Package formatZIP archive
File size1.67 GB
Date addedJune 16, 2026
PriceFree

How to flash Huawei GR3 TAG-L22 with SP Flash Tool

  1. Confirm Huawei GR3 TAG-L22 matches your exact device model and that the phone uses the MT6753 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1.67 GB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Huawei GR3 TAG-L22 free to download?

Yes, Huawei GR3 TAG-L22 can be downloaded free of charge from this page.

How large is the download?

The Huawei GR3 TAG-L22 package is 1.67 GB.

Which tool do I need to flash Huawei GR3 TAG-L22?

Huawei GR3 TAG-L22 is MediaTek MT6753 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

What Android version is Huawei GR3 TAG-L22?

This firmware is Android 5.1 (Lollipop).

Which devices is this firmware for?

This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.

More Huawei files

Back to Huawei