# Huawei GR3 TAG-L22

> Huawei GR3 TAG-L22 is a Huawei firmware file listed under Huawei, distributed as Huawei_GR3_TAG-L22_MT6753_C567B128i_Firmware_Southeast_Asia_EMUI3.1_05021XLY_5.1.zip with a download size of 1.67 GB. It is built for the MediaTek MT6753 chipset and runs Android 5.1. It is flashed with SP Flash Tool. It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/huawei-gr3-tag-l22-99638>

## File details

- **File name:** Huawei GR3 TAG-L22
- **Package:** Huawei_GR3_TAG-L22_MT6753_C567B128i_Firmware_Southeast_Asia_EMUI3.1_05021XLY_5.1.zip
- **Brand / platform:** Huawei
- **Category:** [Huawei](https://www.filefirmware.com/category/huawei)
- **Chipset:** MediaTek MT6753
- **Android version:** Android 5.1 (Lollipop)
- **Flash tool:** SP Flash Tool
- **Package format:** ZIP archive
- **File size:** 1.67 GB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/huawei-gr3-tag-l22-99638>

## About Huawei GR3 TAG-L22

The Huawei GR3 TAG-L22 runs on Huawei's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Huawei GR3 TAG-L22 back to square one. File Name: Huawei_GR3_TAG-L22_MT6753_C567B128i_Firmware_Southeast_Asia_EMUI3.1_05021XLY_5.1.zip File Size: 1.67 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. When it finishes, the Huawei GR3 TAG-L22 restarts with clean factory software. Match the firmware to your variant and follow each step in order.

## How to flash Huawei GR3 TAG-L22 with SP Flash Tool

1. Confirm Huawei GR3 TAG-L22 matches your exact device model and that the phone uses the MT6753 chipset.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (1.67 GB) from the web page and extract it on a Windows PC.
4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

## Guides for this firmware

- [Huawei Firmware Guide: Finding and Flashing Stock ROMs](https://www.filefirmware.com/blog/huawei-firmware-guide-finding-and-flashing-stock-roms): To reflash or unbrick a Huawei device, you must identify the exact model number and chipset to find the compatible stock ROM. Depending on the hardware, you will typically use tools like SP Flash…
- [SP Flash Tool: Download Only vs Format All + Download](https://www.filefirmware.com/blog/sp-flash-tool-download-only-vs-format-all-download): SP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- [Installing MediaTek VCOM Drivers for SP Flash Tool](https://www.filefirmware.com/blog/installing-mediatek-vcom-drivers-for-sp-flash-tool): To flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…

## Frequently asked questions

### Is Huawei GR3 TAG-L22 free to download?

Yes, Huawei GR3 TAG-L22 can be downloaded free of charge from its web page.

### How large is the download?

The Huawei GR3 TAG-L22 package is 1.67 GB.

### Which tool do I need to flash Huawei GR3 TAG-L22?

Huawei GR3 TAG-L22 is MediaTek MT6753 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

### What Android version is Huawei GR3 TAG-L22?

This firmware is Android 5.1 (Lollipop).

### Which devices is this firmware for?

This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.

## More Huawei files

- [Huawei Y9 Prime STK-L22](https://www.filefirmware.com/file/huawei-y9-prime-stk-l22-100996) — 1 GB
- [Huawei Y9 Prime STK-L22HN](https://www.filefirmware.com/file/huawei-y9-prime-stk-l22hn-100985) — 3.31 GB
- [Huawei Y9 Prime STK-LX1](https://www.filefirmware.com/file/huawei-y9-prime-stk-lx1-100983) — 2.95 GB
- [Huawei Y9 Prime Stark-L21](https://www.filefirmware.com/file/huawei-y9-prime-stark-l21-100982) — 2.95 GB
- [Huawei Y9 Prime STK-LX2](https://www.filefirmware.com/file/huawei-y9-prime-stk-lx2-100981) — 1 GB
- [Huawei Y9 Prime Stark-L22B](https://www.filefirmware.com/file/huawei-y9-prime-stark-l22b-100978) — 3.54 GB
- [Huawei Y9 Prime STK-L21](https://www.filefirmware.com/file/huawei-y9-prime-stk-l21-100977) — 2.95 GB
- [Huawei Y9 Jackman-L22](https://www.filefirmware.com/file/huawei-y9-jackman-l22-100976) — 3.32 GB

---

*Source: File Firmware — <https://www.filefirmware.com/file/huawei-gr3-tag-l22-99638>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
