Digma

Digma Platina 9.7 3G NS9797MG

Digma_Platina_9.7_3G_NS9797MG_MT6592_20150629.zip
June 16, 2026 Digma 415 MB Digma

Digma Platina 9.7 3G NS9797MG is a Digma firmware file listed under Digma, distributed as Digma_Platina_9.7_3G_NS9797MG_MT6592_20150629.zip with a download size of 415 MB. It is built for the MediaTek MT6592 chipset and runs Android 9 (Pie), with a firmware build date of June 29, 2015. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 26 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
415 MB
Download Free

About Digma Platina 9.7 3G NS9797MG

The Digma Platina 9.7 3G NS9797MG runs on Digma's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Digma Platina 9.7 3G NS9797MG a fresh start without the clutter that builds up over time. File Name: Digma_Platina_9.7_3G_NS9797MG_MT6592_20150629.zip File Size: 415 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. After flashing, allow a few minutes for the first boot. From there the Digma Platina 9.7 3G NS9797MG should run like a brand new unit.

File Details

File nameDigma Platina 9.7 3G NS9797MG
PackageDigma_Platina_9.7_3G_NS9797MG_MT6592_20150629.zip
Brand / PlatformDigma
CategoryDigma
ChipsetMediaTek MT6592
Android versionAndroid 9 (Pie)
Build dateJune 29, 2015
Flash toolSP Flash Tool
Package formatZIP archive
File size415 MB
Date addedJune 16, 2026
PriceFree

How to flash Digma Platina 9.7 3G NS9797MG with SP Flash Tool

  1. Confirm Digma Platina 9.7 3G NS9797MG matches your exact device model and that the phone uses the MT6592 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (415 MB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Digma Platina 9.7 3G NS9797MG free to download?

Yes, Digma Platina 9.7 3G NS9797MG can be downloaded free of charge from this page.

How large is the download?

The Digma Platina 9.7 3G NS9797MG package is 415 MB.

Which tool do I need to flash Digma Platina 9.7 3G NS9797MG?

Digma Platina 9.7 3G NS9797MG is MediaTek MT6592 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

What Android version is Digma Platina 9.7 3G NS9797MG?

This firmware is Android 9 (Pie), built on June 29, 2015.

Which devices is this firmware for?

This file is intended for Digma devices. Always confirm it matches your specific model before flashing.

More Digma files

Back to Digma