# Digma Platina 9.7 3G NS9797MG

> Digma Platina 9.7 3G NS9797MG is a Digma firmware file listed under Digma, distributed as Digma_Platina_9.7_3G_NS9797MG_MT6592_20150629.zip with a download size of 415 MB. It is built for the MediaTek MT6592 chipset and runs Android 9, with a firmware build date of June 29, 2015. It is flashed with SP Flash Tool. It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/digma-platina-97-3g-ns9797mg-96953>

## File details

- **File name:** Digma Platina 9.7 3G NS9797MG
- **Package:** Digma_Platina_9.7_3G_NS9797MG_MT6592_20150629.zip
- **Brand / platform:** Digma
- **Category:** [Digma](https://www.filefirmware.com/category/digma)
- **Chipset:** MediaTek MT6592
- **Android version:** Android 9 (Pie)
- **Build date:** June 29, 2015
- **Flash tool:** SP Flash Tool
- **Package format:** ZIP archive
- **File size:** 415 MB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/digma-platina-97-3g-ns9797mg-96953>

## About Digma Platina 9.7 3G NS9797MG

The Digma Platina 9.7 3G NS9797MG runs on Digma's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Digma Platina 9.7 3G NS9797MG a fresh start without the clutter that builds up over time. File Name: Digma_Platina_9.7_3G_NS9797MG_MT6592_20150629.zip File Size: 415 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. After flashing, allow a few minutes for the first boot. From there the Digma Platina 9.7 3G NS9797MG should run like a brand new unit.

## How to flash Digma Platina 9.7 3G NS9797MG with SP Flash Tool

1. Confirm Digma Platina 9.7 3G NS9797MG matches your exact device model and that the phone uses the MT6592 chipset.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (415 MB) from the web page and extract it on a Windows PC.
4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

## Guides for this firmware

- [SP Flash Tool: Download Only vs Format All + Download](https://www.filefirmware.com/blog/sp-flash-tool-download-only-vs-format-all-download): SP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- [Installing MediaTek VCOM Drivers for SP Flash Tool](https://www.filefirmware.com/blog/installing-mediatek-vcom-drivers-for-sp-flash-tool): To flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- [What is a Scatter File? Loading MediaTek Firmware in SP Flash Tool](https://www.filefirmware.com/blog/what-is-a-scatter-file-loading-mediatek-firmware-in-sp-flash-tool): A scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…

## Frequently asked questions

### Is Digma Platina 9.7 3G NS9797MG free to download?

Yes, Digma Platina 9.7 3G NS9797MG can be downloaded free of charge from its web page.

### How large is the download?

The Digma Platina 9.7 3G NS9797MG package is 415 MB.

### Which tool do I need to flash Digma Platina 9.7 3G NS9797MG?

Digma Platina 9.7 3G NS9797MG is MediaTek MT6592 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

### What Android version is Digma Platina 9.7 3G NS9797MG?

This firmware is Android 9 (Pie), built on June 29, 2015.

### Which devices is this firmware for?

This file is intended for Digma devices. Always confirm it matches your specific model before flashing.

## More Digma files

- [Digma Vox S503 4G](https://www.filefirmware.com/file/digma-vox-s503-4g-96976) — 736 MB
- [Digma Vox S506 4G](https://www.filefirmware.com/file/digma-vox-s506-4g-96973) — 556 MB
- [Digma Vox S508 3G](https://www.filefirmware.com/file/digma-vox-s508-3g-96970) — 963 MB
- [Digma Vox S502 4G](https://www.filefirmware.com/file/digma-vox-s502-4g-96969) — 758 MB
- [Digma Vox Flash 4G VS5015ML](https://www.filefirmware.com/file/digma-vox-flash-4g-vs5015ml-96968) — 682 MB
- [Digma Vox S505 3G](https://www.filefirmware.com/file/digma-vox-s505-3g-96967) — 614 MB
- [Digma Vox S509 3G](https://www.filefirmware.com/file/digma-vox-s509-3g-96966) — 1007 MB
- [Digma Vox S513 4G](https://www.filefirmware.com/file/digma-vox-s513-4g-96965) — 782 MB

---

*Source: File Firmware — <https://www.filefirmware.com/file/digma-platina-97-3g-ns9797mg-96953>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
