Digma

Digma Linx X1 Pro 3G LS4051MG

Digma_Linx_X1_Pro_3G_LS4051MG_MT6580_20181017.zip
June 16, 2026 Digma 850 MB Digma

Digma Linx X1 Pro 3G LS4051MG is a Digma firmware file listed under Digma, distributed as Digma_Linx_X1_Pro_3G_LS4051MG_MT6580_20181017.zip with a download size of 850 MB. It is built for the MediaTek MT6580 chipset, with a firmware build date of October 17, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 14 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
850 MB
Download Free

About Digma Linx X1 Pro 3G LS4051MG

Looking for the official stock firmware for your Digma Linx X1 Pro 3G LS4051MG? You're in the right place. Below is the original Digma flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Digma Linx X1 Pro 3G LS4051MG a fresh start without the clutter that builds up over time. File Name: Digma_Linx_X1_Pro_3G_LS4051MG_MT6580_20181017.zip File Size: 850 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. With the stock ROM back in place, the Digma Linx X1 Pro 3G LS4051MG returns to factory state. If something fails, verify the file matches your model and retry.

File Details

File nameDigma Linx X1 Pro 3G LS4051MG
PackageDigma_Linx_X1_Pro_3G_LS4051MG_MT6580_20181017.zip
Brand / PlatformDigma
CategoryDigma
ChipsetMediaTek MT6580
Build dateOctober 17, 2018
Flash toolSP Flash Tool
Package formatZIP archive
File size850 MB
Date addedJune 16, 2026
PriceFree

How to flash Digma Linx X1 Pro 3G LS4051MG with SP Flash Tool

  1. Confirm Digma Linx X1 Pro 3G LS4051MG matches your exact device model and that the phone uses the MT6580 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (850 MB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Digma Linx X1 Pro 3G LS4051MG free to download?

Yes, Digma Linx X1 Pro 3G LS4051MG can be downloaded free of charge from this page.

How large is the download?

The Digma Linx X1 Pro 3G LS4051MG package is 850 MB.

Which tool do I need to flash Digma Linx X1 Pro 3G LS4051MG?

Digma Linx X1 Pro 3G LS4051MG is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for Digma devices. Always confirm it matches your specific model before flashing.

More Digma files

Back to Digma