Digma Linx X1 3G LS4050MG
Digma Linx X1 3G LS4050MG is a Digma firmware file listed under Digma, distributed as Digma_Linx_X1_3G_LS4050MG_MT6580_20181017.zip with a download size of 702 MB. It is built for the MediaTek MT6580 chipset, with a firmware build date of October 17, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 14 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Digma Linx X1 3G LS4050MG
If your Digma Linx X1 3G LS4050MG has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Digma flash package along with the details to check before you begin. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Digma_Linx_X1_3G_LS4050MG_MT6580_20181017.zip File Size: 702 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. After flashing, allow a few minutes for the first boot. From there the Digma Linx X1 3G LS4050MG should run like a brand new unit.
File Details
| File name | Digma Linx X1 3G LS4050MG |
|---|---|
| Package | Digma_Linx_X1_3G_LS4050MG_MT6580_20181017.zip |
| Brand / Platform | Digma |
| Category | Digma |
| Chipset | MediaTek MT6580 |
| Build date | October 17, 2018 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 702 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Digma Linx X1 3G LS4050MG with SP Flash Tool
- Confirm Digma Linx X1 3G LS4050MG matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (702 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Digma Linx X1 3G LS4050MG free to download?
Yes, Digma Linx X1 3G LS4050MG can be downloaded free of charge from this page.
How large is the download?
The Digma Linx X1 3G LS4050MG package is 702 MB.
Which tool do I need to flash Digma Linx X1 3G LS4050MG?
Digma Linx X1 3G LS4050MG is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Digma devices. Always confirm it matches your specific model before flashing.