Digma

Digma Linx Rage 4G LS5040PL

Digma_Linx_Rage_4G_LS5040PL_20180615_SPD.zip
June 16, 2026 Digma 925 MB Digma

Digma Linx Rage 4G LS5040PL is a Digma firmware file listed under Digma, distributed as Digma_Linx_Rage_4G_LS5040PL_20180615_SPD.zip with a download size of 925 MB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of June 15, 2018. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 19 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
925 MB
Download Free

About Digma Linx Rage 4G LS5040PL

The Digma Linx Rage 4G LS5040PL runs on Digma's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Digma Linx Rage 4G LS5040PL a fresh start without the clutter that builds up over time. File Name: Digma_Linx_Rage_4G_LS5040PL_20180615_SPD.zip File Size: 925 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. When it finishes, the Digma Linx Rage 4G LS5040PL restarts with clean factory software. Match the firmware to your variant and follow each step in order.

File Details

File nameDigma Linx Rage 4G LS5040PL
PackageDigma_Linx_Rage_4G_LS5040PL_20180615_SPD.zip
Brand / PlatformDigma
CategoryDigma
PlatformUnisoc (Spreadtrum)
Build dateJune 15, 2018
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size925 MB
Date addedJune 16, 2026
PriceFree

How to flash Digma Linx Rage 4G LS5040PL with SPD ResearchDownload

  1. Confirm Digma Linx Rage 4G LS5040PL matches your exact device model and that it is intended for Digma hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (925 MB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Digma Linx Rage 4G LS5040PL free to download?

Yes, Digma Linx Rage 4G LS5040PL can be downloaded free of charge from this page.

How large is the download?

The Digma Linx Rage 4G LS5040PL package is 925 MB.

Which tool do I need to flash Digma Linx Rage 4G LS5040PL?

Digma Linx Rage 4G LS5040PL is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Digma devices. Always confirm it matches your specific model before flashing.

More Digma files

Back to Digma