# Digma Linx Rage 4G LS5040PL

> Digma Linx Rage 4G LS5040PL is a Digma firmware file listed under Digma, distributed as Digma_Linx_Rage_4G_LS5040PL_20180615_SPD.zip with a download size of 925 MB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of June 15, 2018. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/digma-linx-rage-4g-ls5040pl-96911>

## File details

- **File name:** Digma Linx Rage 4G LS5040PL
- **Package:** Digma_Linx_Rage_4G_LS5040PL_20180615_SPD.zip
- **Brand / platform:** Digma
- **Category:** [Digma](https://www.filefirmware.com/category/digma)
- **Platform:** Unisoc (Spreadtrum)
- **Build date:** June 15, 2018
- **Flash tool:** SPD ResearchDownload (or UpgradeDownload)
- **Package format:** ZIP archive
- **File size:** 925 MB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/digma-linx-rage-4g-ls5040pl-96911>

## About Digma Linx Rage 4G LS5040PL

The Digma Linx Rage 4G LS5040PL runs on Digma's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Digma Linx Rage 4G LS5040PL a fresh start without the clutter that builds up over time. File Name: Digma_Linx_Rage_4G_LS5040PL_20180615_SPD.zip File Size: 925 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. When it finishes, the Digma Linx Rage 4G LS5040PL restarts with clean factory software. Match the firmware to your variant and follow each step in order.

## How to flash Digma Linx Rage 4G LS5040PL with SPD ResearchDownload

1. Confirm Digma Linx Rage 4G LS5040PL matches your exact device model and that it is intended for Digma hardware.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (925 MB) from the web page and extract it on a Windows PC.
4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
5. In the tool, load the .pac firmware file from the extracted folder.
6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

## Guides for this firmware

- [Connecting Unisoc Phones to SPD ResearchDownload](https://www.filefirmware.com/blog/connecting-unisoc-phones-to-spd-researchdownload): SPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- [Flashing .pac Files with SPD ResearchDownload Guide](https://www.filefirmware.com/blog/flashing-pac-files-with-spd-researchdownload-guide): SPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- [How to Use SPD ResearchDownload: Firmware Flashing Guide](https://www.filefirmware.com/blog/how-to-use-spd-researchdownload-firmware-flashing-guide): SPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…

## Frequently asked questions

### Is Digma Linx Rage 4G LS5040PL free to download?

Yes, Digma Linx Rage 4G LS5040PL can be downloaded free of charge from its web page.

### How large is the download?

The Digma Linx Rage 4G LS5040PL package is 925 MB.

### Which tool do I need to flash Digma Linx Rage 4G LS5040PL?

Digma Linx Rage 4G LS5040PL is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

### Which devices is this firmware for?

This file is intended for Digma devices. Always confirm it matches your specific model before flashing.

## More Digma files

- [Digma Vox S503 4G](https://www.filefirmware.com/file/digma-vox-s503-4g-96976) — 736 MB
- [Digma Vox S506 4G](https://www.filefirmware.com/file/digma-vox-s506-4g-96973) — 556 MB
- [Digma Vox S508 3G](https://www.filefirmware.com/file/digma-vox-s508-3g-96970) — 963 MB
- [Digma Vox S502 4G](https://www.filefirmware.com/file/digma-vox-s502-4g-96969) — 758 MB
- [Digma Vox Flash 4G VS5015ML](https://www.filefirmware.com/file/digma-vox-flash-4g-vs5015ml-96968) — 682 MB
- [Digma Vox S505 3G](https://www.filefirmware.com/file/digma-vox-s505-3g-96967) — 614 MB
- [Digma Vox S509 3G](https://www.filefirmware.com/file/digma-vox-s509-3g-96966) — 1007 MB
- [Digma Vox S513 4G](https://www.filefirmware.com/file/digma-vox-s513-4g-96965) — 782 MB

---

*Source: File Firmware — <https://www.filefirmware.com/file/digma-linx-rage-4g-ls5040pl-96911>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
