Digma

Digma Linx Base 4G LT5052ML

Digma_Linx_Base_4G_LT5052ML_MT6739_20180905.zip
June 16, 2026 Digma 648 MB Digma

Digma Linx Base 4G LT5052ML is a Digma firmware file listed under Digma, distributed as Digma_Linx_Base_4G_LT5052ML_MT6739_20180905.zip with a download size of 648 MB. It is built for the MediaTek MT6739 chipset, with a firmware build date of September 05, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 14 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
648 MB
Download Free

About Digma Linx Base 4G LT5052ML

Looking for the official stock firmware for your Digma Linx Base 4G LT5052ML? You're in the right place. Below is the original Digma flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Digma_Linx_Base_4G_LT5052ML_MT6739_20180905.zip File Size: 648 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. When it finishes, the Digma Linx Base 4G LT5052ML restarts with clean factory software. Match the firmware to your variant and follow each step in order.

File Details

File nameDigma Linx Base 4G LT5052ML
PackageDigma_Linx_Base_4G_LT5052ML_MT6739_20180905.zip
Brand / PlatformDigma
CategoryDigma
ChipsetMediaTek MT6739
Build dateSeptember 05, 2018
Flash toolSP Flash Tool
Package formatZIP archive
File size648 MB
Date addedJune 16, 2026
PriceFree

How to flash Digma Linx Base 4G LT5052ML with SP Flash Tool

  1. Confirm Digma Linx Base 4G LT5052ML matches your exact device model and that the phone uses the MT6739 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (648 MB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Digma Linx Base 4G LT5052ML free to download?

Yes, Digma Linx Base 4G LT5052ML can be downloaded free of charge from this page.

How large is the download?

The Digma Linx Base 4G LT5052ML package is 648 MB.

Which tool do I need to flash Digma Linx Base 4G LT5052ML?

Digma Linx Base 4G LT5052ML is MediaTek MT6739 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for Digma devices. Always confirm it matches your specific model before flashing.

More Digma files

Back to Digma