# Digma Linx Base 4G LT5052ML

> Digma Linx Base 4G LT5052ML is a Digma firmware file listed under Digma, distributed as Digma_Linx_Base_4G_LT5052ML_MT6739_20180905.zip with a download size of 648 MB. It is built for the MediaTek MT6739 chipset, with a firmware build date of September 05, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/digma-linx-base-4g-lt5052ml-96888>

## File details

- **File name:** Digma Linx Base 4G LT5052ML
- **Package:** Digma_Linx_Base_4G_LT5052ML_MT6739_20180905.zip
- **Brand / platform:** Digma
- **Category:** [Digma](https://www.filefirmware.com/category/digma)
- **Chipset:** MediaTek MT6739
- **Build date:** September 05, 2018
- **Flash tool:** SP Flash Tool
- **Package format:** ZIP archive
- **File size:** 648 MB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/digma-linx-base-4g-lt5052ml-96888>

## About Digma Linx Base 4G LT5052ML

Looking for the official stock firmware for your Digma Linx Base 4G LT5052ML? You're in the right place. Below is the original Digma flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Digma_Linx_Base_4G_LT5052ML_MT6739_20180905.zip File Size: 648 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. When it finishes, the Digma Linx Base 4G LT5052ML restarts with clean factory software. Match the firmware to your variant and follow each step in order.

## How to flash Digma Linx Base 4G LT5052ML with SP Flash Tool

1. Confirm Digma Linx Base 4G LT5052ML matches your exact device model and that the phone uses the MT6739 chipset.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (648 MB) from the web page and extract it on a Windows PC.
4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

## Guides for this firmware

- [MT6739 Firmware Guide: Flashing Tools and Instructions](https://www.filefirmware.com/blog/mt6739-firmware-guide-flashing-tools-and-instructions): The MT6739 is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- [SP Flash Tool: Download Only vs Format All + Download](https://www.filefirmware.com/blog/sp-flash-tool-download-only-vs-format-all-download): SP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- [Installing MediaTek VCOM Drivers for SP Flash Tool](https://www.filefirmware.com/blog/installing-mediatek-vcom-drivers-for-sp-flash-tool): To flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…

## Frequently asked questions

### Is Digma Linx Base 4G LT5052ML free to download?

Yes, Digma Linx Base 4G LT5052ML can be downloaded free of charge from its web page.

### How large is the download?

The Digma Linx Base 4G LT5052ML package is 648 MB.

### Which tool do I need to flash Digma Linx Base 4G LT5052ML?

Digma Linx Base 4G LT5052ML is MediaTek MT6739 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

### Which devices is this firmware for?

This file is intended for Digma devices. Always confirm it matches your specific model before flashing.

## More Digma files

- [Digma Vox S503 4G](https://www.filefirmware.com/file/digma-vox-s503-4g-96976) — 736 MB
- [Digma Vox S506 4G](https://www.filefirmware.com/file/digma-vox-s506-4g-96973) — 556 MB
- [Digma Vox S508 3G](https://www.filefirmware.com/file/digma-vox-s508-3g-96970) — 963 MB
- [Digma Vox S502 4G](https://www.filefirmware.com/file/digma-vox-s502-4g-96969) — 758 MB
- [Digma Vox Flash 4G VS5015ML](https://www.filefirmware.com/file/digma-vox-flash-4g-vs5015ml-96968) — 682 MB
- [Digma Vox S505 3G](https://www.filefirmware.com/file/digma-vox-s505-3g-96967) — 614 MB
- [Digma Vox S509 3G](https://www.filefirmware.com/file/digma-vox-s509-3g-96966) — 1007 MB
- [Digma Vox S513 4G](https://www.filefirmware.com/file/digma-vox-s513-4g-96965) — 782 MB

---

*Source: File Firmware — <https://www.filefirmware.com/file/digma-linx-base-4g-lt5052ml-96888>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
