Digma Linx B510 3G
Digma Linx B510 3G is a Digma firmware file listed under Digma, distributed as Digma_Linx_B510_3G_MT6580_20180205_7.0.zip with a download size of 786 MB. It is built for the MediaTek MT6580 chipset and runs Android 7.0 (Nougat), with a firmware build date of February 05, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 31 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Digma Linx B510 3G
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Digma Linx B510 3G owners, this page hosts the original Digma stock ROM and the key file details. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Digma Linx B510 3G to factory condition. File Name: Digma_Linx_B510_3G_MT6580_20180205_7.0.zip File Size: 786 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. With the stock ROM back in place, the Digma Linx B510 3G returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Digma Linx B510 3G |
|---|---|
| Package | Digma_Linx_B510_3G_MT6580_20180205_7.0.zip |
| Brand / Platform | Digma |
| Category | Digma |
| Chipset | MediaTek MT6580 |
| Android version | Android 7.0 (Nougat) |
| Build date | February 05, 2018 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 786 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Digma Linx B510 3G with SP Flash Tool
- Confirm Digma Linx B510 3G matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (786 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Digma Linx B510 3G free to download?
Yes, Digma Linx B510 3G can be downloaded free of charge from this page.
How large is the download?
The Digma Linx B510 3G package is 786 MB.
Which tool do I need to flash Digma Linx B510 3G?
Digma Linx B510 3G is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Digma Linx B510 3G?
This firmware is Android 7.0 (Nougat), built on February 05, 2018.
Which devices is this firmware for?
This file is intended for Digma devices. Always confirm it matches your specific model before flashing.