Amschel P700
Amschel P700 is a Amschel firmware file listed under Amschel, distributed as Amschel_P700_MT6580_20180129_5.1.ZIP with a download size of 559 MB. It is built for the MediaTek MT6580 chipset and runs Android 5.1 (Lollipop), with a firmware build date of January 29, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 6 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Amschel P700
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Amschel P700 owners, this page hosts the original Amschel stock ROM and the key file details. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Amschel P700 to factory condition. File Name: Amschel_P700_MT6580_20180129_5.1.ZIP File Size: 559 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. Once installed, your Amschel P700 should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Amschel P700 |
|---|---|
| Package | Amschel_P700_MT6580_20180129_5.1.ZIP |
| Brand / Platform | Amschel |
| Category | Amschel |
| Chipset | MediaTek MT6580 |
| Android version | Android 5.1 (Lollipop) |
| Build date | January 29, 2018 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 559 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Amschel P700 with SP Flash Tool
- Confirm Amschel P700 matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (559 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Amschel P700 free to download?
Yes, Amschel P700 can be downloaded free of charge from this page.
How large is the download?
The Amschel P700 package is 559 MB.
Which tool do I need to flash Amschel P700?
Amschel P700 is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Amschel P700?
This firmware is Android 5.1 (Lollipop), built on January 29, 2018.
Which devices is this firmware for?
This file is intended for Amschel devices. Always confirm it matches your specific model before flashing.