Alphard AX3
Alphard AX3 is a Alphard firmware file listed under Alphard, distributed as Alphard_AX3_MT6580_20170815_5.1.zip with a download size of 604 MB. It is built for the MediaTek MT6580 chipset and runs Android 5.1 (Lollipop), with a firmware build date of August 15, 2017. It is flashed with SP Flash Tool. It was published on June 09, 2026. This page has been viewed 16 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Alphard AX3
Alphard AX3 Stock ROM Firmware (Flash File) The Stock ROM (firmware) can be used to reinstall the operating system (OS) on the mobile device. It can be very handy when experiencing software errors, facing a device start-up loop, dealing with battery drain issues, or upgrading or downgrading the mobile OS. File Name: Alphard_AX3_MT6580_20170815_5.1.zip File Size: 604 MB Flash Tool: SP Flash Tool for Windows | SP Flash Tool for Linux How-to Flash (install): Follow Tutorial Mirror 1 (Free)Mirror 2 (Paid)
File Details
| File name | Alphard AX3 |
|---|---|
| Package | Alphard_AX3_MT6580_20170815_5.1.zip |
| Brand / Platform | Alphard |
| Category | Alphard |
| Chipset | MediaTek MT6580 |
| Android version | Android 5.1 (Lollipop) |
| Build date | August 15, 2017 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 604 MB |
| Date added | June 09, 2026 |
| Price | Free |
How to flash Alphard AX3 with SP Flash Tool
- Confirm Alphard AX3 matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (604 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Alphard AX3 free to download?
Yes, Alphard AX3 can be downloaded free of charge from this page.
How large is the download?
The Alphard AX3 package is 604 MB.
Which tool do I need to flash Alphard AX3?
Alphard AX3 is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Alphard AX3?
This firmware is Android 5.1 (Lollipop), built on August 15, 2017.
Which devices is this firmware for?
This file is intended for Alphard devices. Always confirm it matches your specific model before flashing.