AllCall Heat 3 Stock Firmware
AllCall Heat 3 Stock Firmware is a Allcall firmware file listed under Allcall, distributed as AllCall_Heat_3_MT6737M_20170919_6.0.zip with a download size of 912 MB. It was published on June 16, 2026. This page has been viewed 2 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About AllCall Heat 3 Stock Firmware
Here you will find all the latest Allcall firmware for AllCall Heat 3. If you are looking for AllCall Heat 3 stock ROM firmware, then you are on the right page. Before downloading, make sure your device is AllCall Heat 3, if it is not, then flashing the below stock firmware can brick your device. The AllCall Heat 3 firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download AllCall Heat 3 Firmware File Name : AllCall_Heat_3_MT6737M_20170919_6.0.zip File Size : 912 MB Get Firmware Also: Allcall Hot 1 Stock Firmware How To Flash AllCall Heat 3 Stock Firmware Download and extract the AllCall Heat 3 firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the AllCall Heat 3 firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your AllCall Heat 3 device from the computer and restart the device. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your AllCall Heat 3 device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U
File Details
| File name | AllCall Heat 3 Stock Firmware |
|---|---|
| Package | AllCall_Heat_3_MT6737M_20170919_6.0.zip |
| Brand / Platform | Allcall |
| Category | Allcall |
| File size | 912 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to use this file
- Confirm AllCall Heat 3 Stock Firmware matches your exact device model and that it is intended for Allcall hardware.
- Back up your personal data, as flashing firmware can erase the device.
- Download the file (912 MB) using the button above.
- Use the appropriate flashing tool for your platform and follow the on-screen steps.
- Keep the device charged and connected until the process completes.
Frequently asked questions
Is AllCall Heat 3 Stock Firmware free to download?
Yes, AllCall Heat 3 Stock Firmware can be downloaded free of charge from this page.
How large is the download?
The AllCall Heat 3 Stock Firmware package is 912 MB.
Which devices is this firmware for?
This file is intended for Allcall devices. Always confirm it matches your specific model before flashing.