Zync M501
Zync M501 is a Zync firmware file listed under Zync, distributed as Zync_M501_MT6577_13122012.zip with a download size of 249 MB. It is built for the MediaTek MT6577 chipset, with a firmware build date of December 13, 2012. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 162 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Zync M501
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Zync M501 owners, this page hosts the original Zync stock ROM and the key file details. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Zync M501 a fresh start without the clutter that builds up over time. File Name: Zync_M501_MT6577_13122012.zip File Size: 249 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. With the stock ROM back in place, the Zync M501 returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Zync M501 |
|---|---|
| Package | Zync_M501_MT6577_13122012.zip |
| Brand / Platform | Zync |
| Category | Zync |
| Chipset | MediaTek MT6577 |
| Build date | December 13, 2012 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 249 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Zync M501 with SP Flash Tool
- Confirm Zync M501 matches your exact device model and that the phone uses the MT6577 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (249 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Zync M501 free to download?
Yes, Zync M501 can be downloaded free of charge from this page.
How large is the download?
The Zync M501 package is 249 MB.
Which tool do I need to flash Zync M501?
Zync M501 is MediaTek MT6577 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Zync devices. Always confirm it matches your specific model before flashing.