ZTE Blade L3 Plus
ZTE Blade L3 Plus is a ZTE firmware file listed under ZTE, distributed as ZTE_Blade_L3_Plus_MT6582_V1.0.0_20170208_4.4.2.zip with a download size of 592 MB. It is built for the MediaTek MT6582 chipset and runs Android 4.4 (KitKat), with a firmware build date of February 08, 2017. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 30 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About ZTE Blade L3 Plus
Looking for the official stock firmware for your ZTE Blade L3 Plus? You're in the right place. Below is the original ZTE flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: ZTE_Blade_L3_Plus_MT6582_V1.0.0_20170208_4.4.2.zip File Size: 592 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. When it finishes, the ZTE Blade L3 Plus restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | ZTE Blade L3 Plus |
|---|---|
| Package | ZTE_Blade_L3_Plus_MT6582_V1.0.0_20170208_4.4.2.zip |
| Brand / Platform | ZTE |
| Category | ZTE |
| Chipset | MediaTek MT6582 |
| Android version | Android 4.4 (KitKat) |
| Build date | February 08, 2017 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 592 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash ZTE Blade L3 Plus with SP Flash Tool
- Confirm ZTE Blade L3 Plus matches your exact device model and that the phone uses the MT6582 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (592 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6582 Firmware: Flashing Tools and Safety GuideThe MT6582 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device powered by this chipset, you will typically need the SP Flash Tool and the…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is ZTE Blade L3 Plus free to download?
Yes, ZTE Blade L3 Plus can be downloaded free of charge from this page.
How large is the download?
The ZTE Blade L3 Plus package is 592 MB.
Which tool do I need to flash ZTE Blade L3 Plus?
ZTE Blade L3 Plus is MediaTek MT6582 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is ZTE Blade L3 Plus?
This firmware is Android 4.4 (KitKat), built on February 08, 2017.
Which devices is this firmware for?
This file is intended for ZTE devices. Always confirm it matches your specific model before flashing.