ZTE Blade L2
ZTE Blade L2 is a ZTE firmware file listed under ZTE, distributed as ZTE_Blade_L2_MT6582_V1.1_16112015_4.2.2.zip with a download size of 486 MB. It is built for the MediaTek MT6582 chipset and runs Android 4.2 (Jelly Bean), with a firmware build date of November 16, 2015. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 21 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About ZTE Blade L2
Sometimes a clean firmware install is the best fix for a misbehaving phone. For ZTE Blade L2 owners, this page hosts the original ZTE stock ROM and the key file details. It can rescue a bricked handset, fix IMEI or baseband errors, and give the ZTE Blade L2 a fresh start without the clutter that builds up over time. File Name: ZTE_Blade_L2_MT6582_V1.1_16112015_4.2.2.zip File Size: 486 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. After flashing, allow a few minutes for the first boot. From there the ZTE Blade L2 should run like a brand new unit.
File Details
| File name | ZTE Blade L2 |
|---|---|
| Package | ZTE_Blade_L2_MT6582_V1.1_16112015_4.2.2.zip |
| Brand / Platform | ZTE |
| Category | ZTE |
| Chipset | MediaTek MT6582 |
| Android version | Android 4.2 (Jelly Bean) |
| Build date | November 16, 2015 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 486 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash ZTE Blade L2 with SP Flash Tool
- Confirm ZTE Blade L2 matches your exact device model and that the phone uses the MT6582 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (486 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6582 Firmware: Flashing Tools and Safety GuideThe MT6582 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device powered by this chipset, you will typically need the SP Flash Tool and the…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is ZTE Blade L2 free to download?
Yes, ZTE Blade L2 can be downloaded free of charge from this page.
How large is the download?
The ZTE Blade L2 package is 486 MB.
Which tool do I need to flash ZTE Blade L2?
ZTE Blade L2 is MediaTek MT6582 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is ZTE Blade L2?
This firmware is Android 4.2 (Jelly Bean), built on November 16, 2015.
Which devices is this firmware for?
This file is intended for ZTE devices. Always confirm it matches your specific model before flashing.