Xolo Era 4G
Xolo Era 4G is a Xolo firmware file listed under Xolo, distributed as Xolo_Era_4G_S118_20160206_SPD.zip with a download size of 771 MB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of February 06, 2016. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 4 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Xolo Era 4G
Looking for the official stock firmware for your Xolo Era 4G? You're in the right place. Below is the original Xolo flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Xolo_Era_4G_S118_20160206_SPD.zip File Size: 771 MB Back up your files, charge the Xolo Era 4G past 50 percent, install the matching drivers, and only then begin. When it finishes, the Xolo Era 4G restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Xolo Era 4G |
|---|---|
| Package | Xolo_Era_4G_S118_20160206_SPD.zip |
| Brand / Platform | Xolo |
| Category | Xolo |
| Platform | Unisoc (Spreadtrum) |
| Build date | February 06, 2016 |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 771 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Xolo Era 4G with SPD ResearchDownload
- Confirm Xolo Era 4G matches your exact device model and that it is intended for Xolo hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (771 MB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Connecting Unisoc Phones to SPD ResearchDownloadSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Xolo Era 4G free to download?
Yes, Xolo Era 4G can be downloaded free of charge from this page.
How large is the download?
The Xolo Era 4G package is 771 MB.
Which tool do I need to flash Xolo Era 4G?
Xolo Era 4G is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
Which devices is this firmware for?
This file is intended for Xolo devices. Always confirm it matches your specific model before flashing.