# Xiaomi Redmi 9C NFC

> Xiaomi Redmi 9C NFC is a Xiaomi firmware file listed under Xiaomi, distributed as Xiaomi_Redmi_9C_NFC_MT6765_V12.0.2.0.QCSMIXM_20200825.0000.00_Global_10.zip with a download size of 3 GB. It is built for the MediaTek MT6765 chipset, with a firmware build date of August 25, 2020. It is flashed with SP Flash Tool. It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/xiaomi-redmi-9c-nfc-119661>

## File details

- **File name:** Xiaomi Redmi 9C NFC
- **Package:** Xiaomi_Redmi_9C_NFC_MT6765_V12.0.2.0.QCSMIXM_20200825.0000.00_Global_10.zip
- **Brand / platform:** Xiaomi
- **Category:** [Xiaomi](https://www.filefirmware.com/category/xiaomi)
- **Chipset:** MediaTek MT6765
- **Build date:** August 25, 2020
- **Flash tool:** SP Flash Tool
- **Package format:** ZIP archive
- **File size:** 3 GB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/xiaomi-redmi-9c-nfc-119661>

## About Xiaomi Redmi 9C NFC

If your Xiaomi Redmi 9C NFC has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Xiaomi flash package along with the details to check before you begin. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Xiaomi_Redmi_9C_NFC_MT6765_V12.0.2.0.QCSMIXM_20200825.0000.00_Global_10.zip File Size: 3 GB Back up your files, charge the Xiaomi Redmi 9C NFC past 50 percent, install the matching drivers, and only then begin. When it finishes, the Xiaomi Redmi 9C NFC restarts with clean factory software. Match the firmware to your variant and follow each step in order.

## How to flash Xiaomi Redmi 9C NFC with SP Flash Tool

1. Confirm Xiaomi Redmi 9C NFC matches your exact device model and that the phone uses the MT6765 chipset.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (3 GB) from the web page and extract it on a Windows PC.
4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

## Guides for this firmware

- [MT6765 Firmware Guide: Tools and Flashing Instructions](https://www.filefirmware.com/blog/mt6765-firmware-guide-tools-and-flashing-instructions): The MT6765 is a MediaTek chipset used across a wide variety of budget and mid-range Android devices. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- [SP Flash Tool: Download Only vs Format All + Download](https://www.filefirmware.com/blog/sp-flash-tool-download-only-vs-format-all-download): SP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- [Installing MediaTek VCOM Drivers for SP Flash Tool](https://www.filefirmware.com/blog/installing-mediatek-vcom-drivers-for-sp-flash-tool): To flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…

## Frequently asked questions

### Is Xiaomi Redmi 9C NFC free to download?

Yes, Xiaomi Redmi 9C NFC can be downloaded free of charge from its web page.

### How large is the download?

The Xiaomi Redmi 9C NFC package is 3 GB.

### Which tool do I need to flash Xiaomi Redmi 9C NFC?

Xiaomi Redmi 9C NFC is MediaTek MT6765 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

### Which devices is this firmware for?

This file is intended for Xiaomi devices. Always confirm it matches your specific model before flashing.

## More Xiaomi files

- [Xiaomi Redmi Note Prime](https://www.filefirmware.com/file/xiaomi-redmi-note-prime-119724) — 1 GB
- [Xiaomi Redmi Y2](https://www.filefirmware.com/file/xiaomi-redmi-y2-119723) — 2 GB
- [Xiaomi Redmi Note 9](https://www.filefirmware.com/file/xiaomi-redmi-note-9-119721) — 6 GB
- [Xiaomi Redmi Note 9S](https://www.filefirmware.com/file/xiaomi-redmi-note-9s-119718) — 4 GB
- [Xiaomi Redmi Note 9 Pro](https://www.filefirmware.com/file/xiaomi-redmi-note-9-pro-119717) — 3 GB
- [Xiaomi Redmi Note 8](https://www.filefirmware.com/file/xiaomi-redmi-note-8-119716) — 3.9 GB
- [Xiaomi Redmi Note 9 4G](https://www.filefirmware.com/file/xiaomi-redmi-note-9-4g-119715) — 3.3 GB
- [Xiaomi Redmi Note 8A](https://www.filefirmware.com/file/xiaomi-redmi-note-8a-119713) — 3 GB

---

*Source: File Firmware — <https://www.filefirmware.com/file/xiaomi-redmi-9c-nfc-119661>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
