Wing Hero 40S
Wing Hero 40S is a Wing firmware file listed under Wing, distributed as Wing_Hero_40S_MT6572_07072015.ZIP with a download size of 331 MB. It is built for the MediaTek MT6572 chipset, with a firmware build date of July 07, 2015. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 5 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Wing Hero 40S
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Wing Hero 40S owners, this page hosts the original Wing stock ROM and the key file details. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Wing Hero 40S a fresh start without the clutter that builds up over time. File Name: Wing_Hero_40S_MT6572_07072015.ZIP File Size: 331 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. After flashing, allow a few minutes for the first boot. From there the Wing Hero 40S should run like a brand new unit.
File Details
| File name | Wing Hero 40S |
|---|---|
| Package | Wing_Hero_40S_MT6572_07072015.ZIP |
| Brand / Platform | Wing |
| Category | Wing |
| Chipset | MediaTek MT6572 |
| Build date | July 07, 2015 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 331 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Wing Hero 40S with SP Flash Tool
- Confirm Wing Hero 40S matches your exact device model and that the phone uses the MT6572 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (331 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6572 Firmware: Flashing Tools and Safety GuideThe MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Wing Hero 40S free to download?
Yes, Wing Hero 40S can be downloaded free of charge from this page.
How large is the download?
The Wing Hero 40S package is 331 MB.
Which tool do I need to flash Wing Hero 40S?
Wing Hero 40S is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Wing devices. Always confirm it matches your specific model before flashing.