Whoop WS55L
Whoop WS55L is a Whoop firmware file listed under Whoop, distributed as Whoop_WS55L_MT6739_8.1.ZIP with a download size of 905 MB. It is built for the MediaTek MT6739 chipset and runs Android 8.1 (Oreo). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 11 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Whoop WS55L
If your Whoop WS55L has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Whoop flash package along with the details to check before you begin. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Whoop WS55L back to square one. File Name: Whoop_WS55L_MT6739_8.1.ZIP File Size: 905 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. When it finishes, the Whoop WS55L restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Whoop WS55L |
|---|---|
| Package | Whoop_WS55L_MT6739_8.1.ZIP |
| Brand / Platform | Whoop |
| Category | Whoop |
| Chipset | MediaTek MT6739 |
| Android version | Android 8.1 (Oreo) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 905 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Whoop WS55L with SP Flash Tool
- Confirm Whoop WS55L matches your exact device model and that the phone uses the MT6739 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (905 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6739 Firmware Guide: Flashing Tools and InstructionsThe MT6739 is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Whoop WS55L free to download?
Yes, Whoop WS55L can be downloaded free of charge from this page.
How large is the download?
The Whoop WS55L package is 905 MB.
Which tool do I need to flash Whoop WS55L?
Whoop WS55L is MediaTek MT6739 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Whoop WS55L?
This firmware is Android 8.1 (Oreo).
Which devices is this firmware for?
This file is intended for Whoop devices. Always confirm it matches your specific model before flashing.