Vsun

Vsun Solo Stock Firmware

Vsun_Solo_V17_SPD.zip
June 16, 2026 Vsun 248 MB Vsun

Vsun Solo Stock Firmware is a Vsun firmware file listed under Vsun, distributed as Vsun_Solo_V17_SPD.zip with a download size of 248 MB. It is built for Unisoc (Spreadtrum)-based devices. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 12 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
248 MB
Download Free

About Vsun Solo Stock Firmware

Here you will find all the latest Vsun firmware for Vsun Solo. If you are looking for Vsun Solo stock ROM firmware, then you are on the right page. Before downloading, make sure your device is Vsun Solo, if it is not, then flashing the below stock firmware can brick your device. The Vsun Solo firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download Vsun Solo Firmware File Name : Vsun_Solo_V17_SPD.zip File Size : 248 MB Get Firmware Also: Vsun Sky Stock Firmware How To Flash Vsun Solo Stock Firmware Download and extract the Vsun Solo firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the Vsun Solo firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your Vsun Solo device from the computer and restart the device. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your Vsun Solo device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U

File Details

File nameVsun Solo Stock Firmware
PackageVsun_Solo_V17_SPD.zip
Brand / PlatformVsun
CategoryVsun
PlatformUnisoc (Spreadtrum)
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size248 MB
Date addedJune 16, 2026
PriceFree

How to flash Vsun Solo Stock Firmware with SPD ResearchDownload

  1. Confirm Vsun Solo Stock Firmware matches your exact device model and that it is intended for Vsun hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (248 MB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Vsun Solo Stock Firmware free to download?

Yes, Vsun Solo Stock Firmware can be downloaded free of charge from this page.

How large is the download?

The Vsun Solo Stock Firmware package is 248 MB.

Which tool do I need to flash Vsun Solo Stock Firmware?

Vsun Solo Stock Firmware is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Vsun devices. Always confirm it matches your specific model before flashing.

More Vsun files

Back to Vsun