Vivo Y55S 1610
Vivo Y55S 1610 is a Vivo firmware file listed under Vivo, distributed as Vivo_Y55S_1610_MMB29M_100617_6.0.1_QPST.zip with a download size of 1.4 GB. It is built for Qualcomm-based devices and runs Android 6.0 (Marshmallow). It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. This page has been viewed 19 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Vivo Y55S 1610
Looking for the official stock firmware for your Vivo Y55S 1610? You're in the right place. Below is the original Vivo flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Vivo Y55S 1610 a fresh start without the clutter that builds up over time. File Name: Vivo_Y55S_1610_MMB29M_100617_6.0.1_QPST.zip File Size: 1.4 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. Once installed, your Vivo Y55S 1610 should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Vivo Y55S 1610 |
|---|---|
| Package | Vivo_Y55S_1610_MMB29M_100617_6.0.1_QPST.zip |
| Brand / Platform | Vivo |
| Category | Vivo |
| Platform | Qualcomm |
| Android version | Android 6.0 (Marshmallow) |
| Flash tool | QFIL (part of Qualcomm QPST) |
| Package format | ZIP archive |
| File size | 1.4 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Vivo Y55S 1610 with QFIL
- Confirm Vivo Y55S 1610 matches your exact device model and that it is intended for Vivo hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.4 GB) using the button above and extract it on a Windows PC.
- Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
- In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
- Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
- Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.
Guides for this firmware
- Vivo Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick a Vivo device, you must identify the specific chipset used by your model and use the corresponding flashing tool. By downloading the correct stock ROM and following the…
- How to Get Qualcomm Phones into EDL Mode for QFILTo get a Qualcomm-based phone into EDL (Emergency Download) mode for QFIL, you must trigger a specific boot state that allows the device to be recognized by your PC as a "Qualcomm HS-USB QDLoader…
- How to Fix QFIL Sahara Fail ErrorThe Sahara Fail error in QFIL occurs when the initial communication between the computer and the Qualcomm device fails. This prevents the tool from uploading the Firehose programmer, which is…
Frequently asked questions
Is Vivo Y55S 1610 free to download?
Yes, Vivo Y55S 1610 can be downloaded free of charge from this page.
How large is the download?
The Vivo Y55S 1610 package is 1.4 GB.
Which tool do I need to flash Vivo Y55S 1610?
Vivo Y55S 1610 is Qualcomm firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.
What Android version is Vivo Y55S 1610?
This firmware is Android 6.0 (Marshmallow).
Which devices is this firmware for?
This file is intended for Vivo devices. Always confirm it matches your specific model before flashing.