Vivo X1ST
Vivo X1ST is a Vivo firmware file listed under Vivo, distributed as Vivo_X1ST_MT6589_29102014.zip with a download size of 899 MB. It is built for the MediaTek MT6589 chipset, with a firmware build date of October 29, 2014. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 21 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Vivo X1ST
The Vivo X1ST runs on Vivo's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Vivo X1ST to factory condition. File Name: Vivo_X1ST_MT6589_29102014.zip File Size: 899 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. With the stock ROM back in place, the Vivo X1ST returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Vivo X1ST |
|---|---|
| Package | Vivo_X1ST_MT6589_29102014.zip |
| Brand / Platform | Vivo |
| Category | Vivo |
| Chipset | MediaTek MT6589 |
| Build date | October 29, 2014 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 899 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Vivo X1ST with SP Flash Tool
- Confirm Vivo X1ST matches your exact device model and that the phone uses the MT6589 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (899 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Vivo Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick a Vivo device, you must identify the specific chipset used by your model and use the corresponding flashing tool. By downloading the correct stock ROM and following the…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Vivo X1ST free to download?
Yes, Vivo X1ST can be downloaded free of charge from this page.
How large is the download?
The Vivo X1ST package is 899 MB.
Which tool do I need to flash Vivo X1ST?
Vivo X1ST is MediaTek MT6589 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Vivo devices. Always confirm it matches your specific model before flashing.