Vivo S12 Pro PD2163F
Vivo S12 Pro PD2163F is a Vivo firmware file listed under Vivo, distributed as Vivo_S12_Pro_PD2163F_MT6893_EX_A_3.10.7_211228.zip with a download size of 5.35 GB. It is built for the MediaTek MT6893 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 27 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Vivo S12 Pro PD2163F
The Vivo S12 Pro PD2163F runs on Vivo's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Vivo S12 Pro PD2163F to factory condition. File Name: Vivo_S12_Pro_PD2163F_MT6893_EX_A_3.10.7_211228.zip File Size: 5.35 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. After flashing, allow a few minutes for the first boot. From there the Vivo S12 Pro PD2163F should run like a brand new unit.
File Details
| File name | Vivo S12 Pro PD2163F |
|---|---|
| Package | Vivo_S12_Pro_PD2163F_MT6893_EX_A_3.10.7_211228.zip |
| Brand / Platform | Vivo |
| Category | Vivo |
| Chipset | MediaTek MT6893 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 5.35 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Vivo S12 Pro PD2163F with SP Flash Tool
- Confirm Vivo S12 Pro PD2163F matches your exact device model and that the phone uses the MT6893 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (5.35 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Vivo Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick a Vivo device, you must identify the specific chipset used by your model and use the corresponding flashing tool. By downloading the correct stock ROM and following the…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Vivo S12 Pro PD2163F free to download?
Yes, Vivo S12 Pro PD2163F can be downloaded free of charge from this page.
How large is the download?
The Vivo S12 Pro PD2163F package is 5.35 GB.
Which tool do I need to flash Vivo S12 Pro PD2163F?
Vivo S12 Pro PD2163F is MediaTek MT6893 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Vivo devices. Always confirm it matches your specific model before flashing.