Vivo S1 1907 PD1913F
Vivo S1 1907 PD1913F is a Vivo firmware file listed under Vivo, distributed as Vivo_S1_1907_PD1913F_MT6768_EX_A_1.8.6_070320.zip with a download size of 5.41 GB. It is built for the MediaTek MT6768 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 24 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Vivo S1 1907 PD1913F
Looking for the official stock firmware for your Vivo S1 1907 PD1913F? You're in the right place. Below is the original Vivo flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Vivo_S1_1907_PD1913F_MT6768_EX_A_1.8.6_070320.zip File Size: 5.41 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. When it finishes, the Vivo S1 1907 PD1913F restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Vivo S1 1907 PD1913F |
|---|---|
| Package | Vivo_S1_1907_PD1913F_MT6768_EX_A_1.8.6_070320.zip |
| Brand / Platform | Vivo |
| Category | Vivo |
| Chipset | MediaTek MT6768 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 5.41 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Vivo S1 1907 PD1913F with SP Flash Tool
- Confirm Vivo S1 1907 PD1913F matches your exact device model and that the phone uses the MT6768 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (5.41 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Vivo Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick a Vivo device, you must identify the specific chipset used by your model and use the corresponding flashing tool. By downloading the correct stock ROM and following the…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Vivo S1 1907 PD1913F free to download?
Yes, Vivo S1 1907 PD1913F can be downloaded free of charge from this page.
How large is the download?
The Vivo S1 1907 PD1913F package is 5.41 GB.
Which tool do I need to flash Vivo S1 1907 PD1913F?
Vivo S1 1907 PD1913F is MediaTek MT6768 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Vivo devices. Always confirm it matches your specific model before flashing.