Vivo 11 Pro PD1814F
Vivo 11 Pro PD1814F is a Vivo firmware file listed under Vivo, distributed as Vivo_11_Pro_PD1814F_EX_A_1.7.4_LA.UM.6.2.R1-04300-SDM660_Split_QFIL.zip with a download size of 4.08 GB. It is built for the Qualcomm SDM660 chipset. It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. This page has been viewed 42 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Vivo 11 Pro PD1814F
If your Vivo 11 Pro PD1814F has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Vivo flash package along with the details to check before you begin. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Vivo_11_Pro_PD1814F_EX_A_1.7.4_LA.UM.6.2.R1-04300-SDM660_Split_QFIL.zip File Size: 4.08 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. After flashing, allow a few minutes for the first boot. From there the Vivo 11 Pro PD1814F should run like a brand new unit.
File Details
| File name | Vivo 11 Pro PD1814F |
|---|---|
| Package | Vivo_11_Pro_PD1814F_EX_A_1.7.4_LA.UM.6.2.R1-04300-SDM660_Split_QFIL.zip |
| Brand / Platform | Vivo |
| Category | Vivo |
| Chipset | Qualcomm SDM660 |
| Flash tool | QFIL (part of Qualcomm QPST) |
| Package format | ZIP archive |
| File size | 4.08 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Vivo 11 Pro PD1814F with QFIL
- Confirm Vivo 11 Pro PD1814F matches your exact device model and that the phone uses the SDM660 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (4.08 GB) using the button above and extract it on a Windows PC.
- Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
- In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
- Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
- Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.
Guides for this firmware
- Vivo Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick a Vivo device, you must identify the specific chipset used by your model and use the corresponding flashing tool. By downloading the correct stock ROM and following the…
- How to Get Qualcomm Phones into EDL Mode for QFILTo get a Qualcomm-based phone into EDL (Emergency Download) mode for QFIL, you must trigger a specific boot state that allows the device to be recognized by your PC as a "Qualcomm HS-USB QDLoader…
- How to Fix QFIL Sahara Fail ErrorThe Sahara Fail error in QFIL occurs when the initial communication between the computer and the Qualcomm device fails. This prevents the tool from uploading the Firehose programmer, which is…
Frequently asked questions
Is Vivo 11 Pro PD1814F free to download?
Yes, Vivo 11 Pro PD1814F can be downloaded free of charge from this page.
How large is the download?
The Vivo 11 Pro PD1814F package is 4.08 GB.
Which tool do I need to flash Vivo 11 Pro PD1814F?
Vivo 11 Pro PD1814F is Qualcomm SDM660 firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.
Which devices is this firmware for?
This file is intended for Vivo devices. Always confirm it matches your specific model before flashing.