# Vertex Impress L

> Vertex Impress L is a Vertex firmware file listed under Vertex, distributed as Vertex_Impress_L_MT6572_08052014_4.2.2.zip with a download size of 268 MB. It is built for the MediaTek MT6572 chipset and runs Android 4.2, with a firmware build date of May 08, 2014. It is flashed with SP Flash Tool. It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/vertex-impress-l-116909>

## File details

- **File name:** Vertex Impress L
- **Package:** Vertex_Impress_L_MT6572_08052014_4.2.2.zip
- **Brand / platform:** Vertex
- **Category:** [Vertex](https://www.filefirmware.com/category/vertex)
- **Chipset:** MediaTek MT6572
- **Android version:** Android 4.2 (Jelly Bean)
- **Build date:** May 08, 2014
- **Flash tool:** SP Flash Tool
- **Package format:** ZIP archive
- **File size:** 268 MB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/vertex-impress-l-116909>

## About Vertex Impress L

The Vertex Impress L runs on Vertex's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Vertex Impress L a fresh start without the clutter that builds up over time. File Name: Vertex_Impress_L_MT6572_08052014_4.2.2.zip File Size: 268 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. When it finishes, the Vertex Impress L restarts with clean factory software. Match the firmware to your variant and follow each step in order.

## How to flash Vertex Impress L with SP Flash Tool

1. Confirm Vertex Impress L matches your exact device model and that the phone uses the MT6572 chipset.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (268 MB) from the web page and extract it on a Windows PC.
4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

## Guides for this firmware

- [MT6572 Firmware: Flashing Tools and Safety Guide](https://www.filefirmware.com/blog/mt6572-firmware-flashing-tools-and-safety-guide): The MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- [SP Flash Tool: Download Only vs Format All + Download](https://www.filefirmware.com/blog/sp-flash-tool-download-only-vs-format-all-download): SP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- [Installing MediaTek VCOM Drivers for SP Flash Tool](https://www.filefirmware.com/blog/installing-mediatek-vcom-drivers-for-sp-flash-tool): To flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…

## Frequently asked questions

### Is Vertex Impress L free to download?

Yes, Vertex Impress L can be downloaded free of charge from its web page.

### How large is the download?

The Vertex Impress L package is 268 MB.

### Which tool do I need to flash Vertex Impress L?

Vertex Impress L is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

### What Android version is Vertex Impress L?

This firmware is Android 4.2 (Jelly Bean), built on May 08, 2014.

### Which devices is this firmware for?

This file is intended for Vertex devices. Always confirm it matches your specific model before flashing.

## More Vertex files

- [Vertex Tab 4G 8-1](https://www.filefirmware.com/file/vertex-tab-4g-8-1-116996) — 1.1 GB
- [Vertex Tab 4G 10-1](https://www.filefirmware.com/file/vertex-tab-4g-10-1-116995) — 1 GB
- [Vertex Tiger](https://www.filefirmware.com/file/vertex-tiger-116988) — 1.1 GB
- [Vertex Tab 3G 7-2](https://www.filefirmware.com/file/vertex-tab-3g-7-2-116981) — 1.2 GB
- [Vertex Tab 3G 7-1](https://www.filefirmware.com/file/vertex-tab-3g-7-1-116978) — 1015 MB
- [Vertex Impress Zeon 3G](https://www.filefirmware.com/file/vertex-impress-zeon-3g-116972) — 751 MB
- [Vertex Impress Wolf](https://www.filefirmware.com/file/vertex-impress-wolf-116960) — 1 GB
- [Vertex Impress Zeon 4G](https://www.filefirmware.com/file/vertex-impress-zeon-4g-116957) — 718 MB

---

*Source: File Firmware — <https://www.filefirmware.com/file/vertex-impress-l-116909>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
