# Tecno K8 Stock Firmware > Tecno K8 Stock Firmware is a Tecno firmware file listed under Tecno, distributed as Tecno_K8_SC7731_20180724_6.0_SPD.zip with a download size of 836 MB. It is built for the Unisoc (Spreadtrum) SC7731 chipset and runs Android 6.0, with a firmware build date of July 24, 2018. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. It is available to download free of charge. Web page: ## File details - **File name:** Tecno K8 Stock Firmware - **Package:** Tecno_K8_SC7731_20180724_6.0_SPD.zip - **Brand / platform:** Tecno - **Category:** [Tecno](https://www.filefirmware.com/category/tecno) - **Chipset:** Unisoc (Spreadtrum) SC7731 - **Android version:** Android 6.0 (Marshmallow) - **Build date:** July 24, 2018 - **Flash tool:** SPD ResearchDownload (or UpgradeDownload) - **Package format:** ZIP archive - **File size:** 836 MB - **Date added:** June 16, 2026 - **Price:** Free - **Download:** On the web page: ## About Tecno K8 Stock Firmware Here you will find all the latest Tecno firmware for Tecno K8. If you are looking for Tecno K8 stock ROM firmware, then you are on the right page. Before downloading, make sure your device is Tecno K8, if it is not, then flashing the below stock firmware can brick your device. The Tecno K8 firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download Tecno K8 Firmware File Name : Tecno_K8_SC7731_20180724_6.0_SPD.zip File Size : 836 MB Get Firmware Also: Tecno Camon IN5 Stock Firmware How To Flash Tecno K8 Stock Firmware Download and extract the Tecno K8 firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the Tecno K8 firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your Tecno K8 device from the computer and restart the device. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your Tecno K8 device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U ## How to flash Tecno K8 Stock Firmware with SPD ResearchDownload 1. Confirm Tecno K8 Stock Firmware matches your exact device model and that the phone uses the SC7731 chipset. 2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%. 3. Download the file (836 MB) from the web page and extract it on a Windows PC. 4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload). 5. In the tool, load the .pac firmware file from the extracted folder. 6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key). 7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data. ## Guides for this firmware - [Connecting Unisoc Phones to SPD ResearchDownload](https://www.filefirmware.com/blog/connecting-unisoc-phones-to-spd-researchdownload): SPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool… - [Flashing .pac Files with SPD ResearchDownload Guide](https://www.filefirmware.com/blog/flashing-pac-files-with-spd-researchdownload-guide): SPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick… - [How to Use SPD ResearchDownload: Firmware Flashing Guide](https://www.filefirmware.com/blog/how-to-use-spd-researchdownload-firmware-flashing-guide): SPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users… ## Frequently asked questions ### Is Tecno K8 Stock Firmware free to download? Yes, Tecno K8 Stock Firmware can be downloaded free of charge from its web page. ### How large is the download? The Tecno K8 Stock Firmware package is 836 MB. ### Which tool do I need to flash Tecno K8 Stock Firmware? Tecno K8 Stock Firmware is Unisoc (Spreadtrum) SC7731 firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file. ### What Android version is Tecno K8 Stock Firmware? This firmware is Android 6.0 (Marshmallow), built on July 24, 2018. ### Which devices is this firmware for? This file is intended for Tecno devices. Always confirm it matches your specific model before flashing. ## More Tecno files - [Tecno Pop 2 Air SC7s](https://www.filefirmware.com/file/tecno-pop-2-air-sc7s-116014) — 1.8 GB - [Tecno KF6P](https://www.filefirmware.com/file/tecno-kf6p-116013) — 1.8GB - [Tecno Spark 4 Lite KC8s](https://www.filefirmware.com/file/tecno-spark-4-lite-kc8s-116009) — 1.8GB - [Tecno Tecno](https://www.filefirmware.com/file/tecno-tecno-116004) — 1.7GB - [Tecno KF6h](https://www.filefirmware.com/file/tecno-kf6h-116000) — 4.2GB - [Tecno Pova LD7J Stock Firmware](https://www.filefirmware.com/file/tecno-pova-ld7j-stock-firmware-89068) — 3 GB - [Tecno Spark 4 Mini KC8 Stock Firmware](https://www.filefirmware.com/file/tecno-spark-4-mini-kc8-stock-firmware-89065) — 684 MB - [Tecno LD7J Stock Firmware](https://www.filefirmware.com/file/tecno-ld7j-stock-firmware-89062) — 3.2 GB --- *Source: File Firmware — . Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*