Swipe Konnect Prime
Swipe Konnect Prime is a Swipe firmware file listed under Swipe, distributed as Swipe_Konnect_Prime_V1.6_25072017_SPD.zip with a download size of 878 MB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of July 25, 2017. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on April 28, 2026. This page has been viewed 11 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Swipe Konnect Prime
Swipe Konnect Prime Stock Firmware (Flash File) The Flash File will help you Upgrade, Downgrade, or re-install the Stock Firmware (OS) on your Mobile Device. In addition, the Flash File (ROM) also enables you to repair the Mobile device if facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue. File Name: Swipe_Konnect_Prime_V1.6_25072017_SPD.zip File Size: 878 MB Flash Tool: SPD Flash Tool How to Flash (install): Follow Tutorial (Mediafire)
File Details
| File name | Swipe Konnect Prime |
|---|---|
| Package | Swipe_Konnect_Prime_V1.6_25072017_SPD.zip |
| Brand / Platform | Swipe |
| Category | Swipe |
| Platform | Unisoc (Spreadtrum) |
| Build date | July 25, 2017 |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 878 MB |
| Date added | April 28, 2026 |
| Price | Free |
How to flash Swipe Konnect Prime with SPD ResearchDownload
- Confirm Swipe Konnect Prime matches your exact device model and that it is intended for Swipe hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (878 MB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Swipe Konnect Prime free to download?
Yes, Swipe Konnect Prime can be downloaded free of charge from this page.
How large is the download?
The Swipe Konnect Prime package is 878 MB.
Which tool do I need to flash Swipe Konnect Prime?
Swipe Konnect Prime is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
Which devices is this firmware for?
This file is intended for Swipe devices. Always confirm it matches your specific model before flashing.