Swipe Elite Envy
Swipe Elite Envy is a Swipe firmware file listed under Swipe, distributed as Swipe_Elite_Envy_MSM8909_20180308_6.0.zip with a download size of 1 GB. It is built for the Qualcomm MSM8909 chipset and runs Android 6.0 (Marshmallow), with a firmware build date of March 08, 2018. It is flashed with QFIL (part of Qualcomm QPST). It was published on April 28, 2026. This page has been viewed 12 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Swipe Elite Envy
Swipe Elite Envy Stock Firmware (Flash File) The Flash File will help you Upgrade, Downgrade, or re-install the Stock Firmware (OS) on your Mobile Device. In addition, the Flash File (ROM) also enables you to repair the Mobile device if facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue. File Name: Swipe_Elite_Envy_MSM8909_20180308_6.0.zip File Size: 1 GB Flash Tool: QFIL Flash Tool How to Flash (install): Follow Tutorial (Mediafire)
File Details
| File name | Swipe Elite Envy |
|---|---|
| Package | Swipe_Elite_Envy_MSM8909_20180308_6.0.zip |
| Brand / Platform | Swipe |
| Category | Swipe |
| Chipset | Qualcomm MSM8909 |
| Android version | Android 6.0 (Marshmallow) |
| Build date | March 08, 2018 |
| Flash tool | QFIL (part of Qualcomm QPST) |
| Package format | ZIP archive |
| File size | 1 GB |
| Date added | April 28, 2026 |
| Price | Free |
How to flash Swipe Elite Envy with QFIL
- Confirm Swipe Elite Envy matches your exact device model and that the phone uses the MSM8909 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1 GB) using the button above and extract it on a Windows PC.
- Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
- In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
- Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
- Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.
Guides for this firmware
- How to Fix QFIL Sahara Fail ErrorThe Sahara Fail error in QFIL occurs when the initial communication between the computer and the Qualcomm device fails. This prevents the tool from uploading the Firehose programmer, which is…
- How to Use QFIL: Qualcomm Firmware Flashing GuideQFIL (Qualcomm Flash Image Loader) is a specialized software tool used to flash stock firmware onto devices powered by Qualcomm chipsets. It is part of the Qualcomm QPST (Qualcomm Product Support…
Frequently asked questions
Is Swipe Elite Envy free to download?
Yes, Swipe Elite Envy can be downloaded free of charge from this page.
How large is the download?
The Swipe Elite Envy package is 1 GB.
Which tool do I need to flash Swipe Elite Envy?
Swipe Elite Envy is Qualcomm MSM8909 firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.
What Android version is Swipe Elite Envy?
This firmware is Android 6.0 (Marshmallow), built on March 08, 2018.
Which devices is this firmware for?
This file is intended for Swipe devices. Always confirm it matches your specific model before flashing.