Swipe Elite 4G
Swipe Elite 4G is a Swipe firmware file listed under Swipe, distributed as Swipe_Elite_4G_V2.9_17062017_SPD.zip with a download size of 822 MB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of June 17, 2017. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on April 28, 2026. This page has been viewed 18 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Swipe Elite 4G
Swipe Elite 4G Stock Firmware (Flash File) The Flash File will help you Upgrade, Downgrade, or re-install the Stock Firmware (OS) on your Mobile Device. In addition, the Flash File (ROM) also enables you to repair the Mobile device if facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue. File Name: Swipe_Elite_4G_V2.9_17062017_SPD.zip File Size: 822 MB Flash Tool: SPD Flash Tool How to Flash (install): Follow Tutorial (Mediafire)
File Details
| File name | Swipe Elite 4G |
|---|---|
| Package | Swipe_Elite_4G_V2.9_17062017_SPD.zip |
| Brand / Platform | Swipe |
| Category | Swipe |
| Platform | Unisoc (Spreadtrum) |
| Build date | June 17, 2017 |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 822 MB |
| Date added | April 28, 2026 |
| Price | Free |
How to flash Swipe Elite 4G with SPD ResearchDownload
- Confirm Swipe Elite 4G matches your exact device model and that it is intended for Swipe hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (822 MB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Swipe Elite 4G free to download?
Yes, Swipe Elite 4G can be downloaded free of charge from this page.
How large is the download?
The Swipe Elite 4G package is 822 MB.
Which tool do I need to flash Swipe Elite 4G?
Swipe Elite 4G is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
Which devices is this firmware for?
This file is intended for Swipe devices. Always confirm it matches your specific model before flashing.