Qmobile Power 400 Pro
Qmobile Power 400 Pro is a Qmobile firmware file listed under Qmobile, distributed as Qmobile_Power_400_Pro_MT6261_V04_20180929_MIRA.zip with a download size of 3 MB. It is built for the MediaTek MT6261 chipset, with a firmware build date of September 29, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 12 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Qmobile Power 400 Pro
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Qmobile Power 400 Pro owners, this page hosts the original Qmobile stock ROM and the key file details. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Qmobile Power 400 Pro back to square one. File Name: Qmobile_Power_400_Pro_MT6261_V04_20180929_MIRA.zip File Size: 3 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. After flashing, allow a few minutes for the first boot. From there the Qmobile Power 400 Pro should run like a brand new unit.
File Details
| File name | Qmobile Power 400 Pro |
|---|---|
| Package | Qmobile_Power_400_Pro_MT6261_V04_20180929_MIRA.zip |
| Brand / Platform | Qmobile |
| Category | Qmobile |
| Chipset | MediaTek MT6261 |
| Build date | September 29, 2018 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 3 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Qmobile Power 400 Pro with SP Flash Tool
- Confirm Qmobile Power 400 Pro matches your exact device model and that the phone uses the MT6261 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (3 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Qmobile Power 400 Pro free to download?
Yes, Qmobile Power 400 Pro can be downloaded free of charge from this page.
How large is the download?
The Qmobile Power 400 Pro package is 3 MB.
Which tool do I need to flash Qmobile Power 400 Pro?
Qmobile Power 400 Pro is MediaTek MT6261 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Qmobile devices. Always confirm it matches your specific model before flashing.