Qmobile Matrix 2
Qmobile Matrix 2 is a Qmobile firmware file listed under Qmobile, distributed as Qmobile_Matrix_2_SC6531_MIRA.zip with a download size of 3 MB. It is built for the Unisoc (Spreadtrum) SC6531 chipset. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 7 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Qmobile Matrix 2
The Qmobile Matrix 2 runs on Qmobile's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Qmobile_Matrix_2_SC6531_MIRA.zip File Size: 3 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. When it finishes, the Qmobile Matrix 2 restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Qmobile Matrix 2 |
|---|---|
| Package | Qmobile_Matrix_2_SC6531_MIRA.zip |
| Brand / Platform | Qmobile |
| Category | Qmobile |
| Chipset | Unisoc (Spreadtrum) SC6531 |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 3 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Qmobile Matrix 2 with SPD ResearchDownload
- Confirm Qmobile Matrix 2 matches your exact device model and that the phone uses the SC6531 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (3 MB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Qmobile Matrix 2 free to download?
Yes, Qmobile Matrix 2 can be downloaded free of charge from this page.
How large is the download?
The Qmobile Matrix 2 package is 3 MB.
Which tool do I need to flash Qmobile Matrix 2?
Qmobile Matrix 2 is Unisoc (Spreadtrum) SC6531 firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
Which devices is this firmware for?
This file is intended for Qmobile devices. Always confirm it matches your specific model before flashing.