Qmobile Infinity Prime 1
Qmobile Infinity Prime 1 is a Qmobile firmware file listed under Qmobile, distributed as QMobile_Infinity_Prime_1_MT6739_V7.0_250618_8.1.zip with a download size of 1.41 GB. It is built for the MediaTek MT6739 chipset and runs Android 8.1 (Oreo). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 19 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Qmobile Infinity Prime 1
The Qmobile Infinity Prime 1 runs on Qmobile's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Qmobile Infinity Prime 1 a fresh start without the clutter that builds up over time. File Name: QMobile_Infinity_Prime_1_MT6739_V7.0_250618_8.1.zip File Size: 1.41 GB Back up your files, charge the Qmobile Infinity Prime 1 past 50 percent, install the matching drivers, and only then begin. When it finishes, the Qmobile Infinity Prime 1 restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Qmobile Infinity Prime 1 |
|---|---|
| Package | QMobile_Infinity_Prime_1_MT6739_V7.0_250618_8.1.zip |
| Brand / Platform | Qmobile |
| Category | Qmobile |
| Chipset | MediaTek MT6739 |
| Android version | Android 8.1 (Oreo) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1.41 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Qmobile Infinity Prime 1 with SP Flash Tool
- Confirm Qmobile Infinity Prime 1 matches your exact device model and that the phone uses the MT6739 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.41 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6739 Firmware Guide: Flashing Tools and InstructionsThe MT6739 is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Qmobile Infinity Prime 1 free to download?
Yes, Qmobile Infinity Prime 1 can be downloaded free of charge from this page.
How large is the download?
The Qmobile Infinity Prime 1 package is 1.41 GB.
Which tool do I need to flash Qmobile Infinity Prime 1?
Qmobile Infinity Prime 1 is MediaTek MT6739 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Qmobile Infinity Prime 1?
This firmware is Android 8.1 (Oreo).
Which devices is this firmware for?
This file is intended for Qmobile devices. Always confirm it matches your specific model before flashing.