Qmobile E860
Qmobile E860 is a Qmobile firmware file listed under Qmobile, distributed as Qmobile_E860_MT6260_02112014_MIRA.zip with a download size of 11 MB. It is built for the MediaTek MT6260 chipset, with a firmware build date of November 02, 2014. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 5 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Qmobile E860
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Qmobile E860 owners, this page hosts the original Qmobile stock ROM and the key file details. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Qmobile E860 a fresh start without the clutter that builds up over time. File Name: Qmobile_E860_MT6260_02112014_MIRA.zip File Size: 11 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. Once installed, your Qmobile E860 should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Qmobile E860 |
|---|---|
| Package | Qmobile_E860_MT6260_02112014_MIRA.zip |
| Brand / Platform | Qmobile |
| Category | Qmobile |
| Chipset | MediaTek MT6260 |
| Build date | November 02, 2014 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 11 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Qmobile E860 with SP Flash Tool
- Confirm Qmobile E860 matches your exact device model and that the phone uses the MT6260 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (11 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Qmobile E860 free to download?
Yes, Qmobile E860 can be downloaded free of charge from this page.
How large is the download?
The Qmobile E860 package is 11 MB.
Which tool do I need to flash Qmobile E860?
Qmobile E860 is MediaTek MT6260 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Qmobile devices. Always confirm it matches your specific model before flashing.