Qmobile E4
Qmobile E4 is a Qmobile firmware file listed under Qmobile, distributed as QMobile_E4_2020_MT6261_V05_090919_MIRA.zip with a download size of 3 MB. It is built for the MediaTek MT6261 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 6 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Qmobile E4
Looking for the official stock firmware for your Qmobile E4? You're in the right place. Below is the original Qmobile flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Qmobile E4 a fresh start without the clutter that builds up over time. File Name: QMobile_E4_2020_MT6261_V05_090919_MIRA.zip File Size: 3 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. With the stock ROM back in place, the Qmobile E4 returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Qmobile E4 |
|---|---|
| Package | QMobile_E4_2020_MT6261_V05_090919_MIRA.zip |
| Brand / Platform | Qmobile |
| Category | Qmobile |
| Chipset | MediaTek MT6261 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 3 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Qmobile E4 with SP Flash Tool
- Confirm Qmobile E4 matches your exact device model and that the phone uses the MT6261 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (3 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Qmobile E4 free to download?
Yes, Qmobile E4 can be downloaded free of charge from this page.
How large is the download?
The Qmobile E4 package is 3 MB.
Which tool do I need to flash Qmobile E4?
Qmobile E4 is MediaTek MT6261 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Qmobile devices. Always confirm it matches your specific model before flashing.