# Oppo Reno 3 Pro Clone > Oppo Reno 3 Pro Clone is an Oppo firmware file listed under Oppo, distributed as Oppo_Reno_3_Pro_Clone_MT6572_180820_4.4.2.zip with a download size of 317 MB. It is built for the MediaTek MT6572 chipset and runs Android 4.4. It is flashed with SP Flash Tool. It was published on June 16, 2026. It is available to download free of charge. Web page: ## File details - **File name:** Oppo Reno 3 Pro Clone - **Package:** Oppo_Reno_3_Pro_Clone_MT6572_180820_4.4.2.zip - **Brand / platform:** Oppo - **Category:** [Oppo](https://www.filefirmware.com/category/oppo) - **Chipset:** MediaTek MT6572 - **Android version:** Android 4.4 (KitKat) - **Flash tool:** SP Flash Tool - **Package format:** ZIP archive - **File size:** 317 MB - **Date added:** June 16, 2026 - **Price:** Free - **Download:** On the web page: ## About Oppo Reno 3 Pro Clone Sometimes a clean firmware install is the best fix for a misbehaving phone. For Oppo Reno 3 Pro Clone owners, this page hosts the original Oppo stock ROM and the key file details. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Oppo Reno 3 Pro Clone to factory condition. File Name: Oppo_Reno_3_Pro_Clone_MT6572_180820_4.4.2.zip File Size: 317 MB Back up your files, charge the Oppo Reno 3 Pro Clone past 50 percent, install the matching drivers, and only then begin. With the stock ROM back in place, the Oppo Reno 3 Pro Clone returns to factory state. If something fails, verify the file matches your model and retry. ## How to flash Oppo Reno 3 Pro Clone with SP Flash Tool 1. Confirm Oppo Reno 3 Pro Clone matches your exact device model and that the phone uses the MT6572 chipset. 2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%. 3. Download the file (317 MB) from the web page and extract it on a Windows PC. 4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool. 5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder. 6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected). 7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration. ## Guides for this firmware - [MT6572 Firmware: Flashing Tools and Safety Guide](https://www.filefirmware.com/blog/mt6572-firmware-flashing-tools-and-safety-guide): The MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and… - [Oppo Firmware Guide: Finding and Flashing Stock ROMs](https://www.filefirmware.com/blog/oppo-firmware-guide-finding-and-flashing-stock-roms): To reflash or unbrick an Oppo device, you must use a stock ROM that matches your specific model and chipset. Depending on the hardware, this typically involves using tools like SP Flash Tool for… - [SP Flash Tool: Download Only vs Format All + Download](https://www.filefirmware.com/blog/sp-flash-tool-download-only-vs-format-all-download): SP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended… ## Frequently asked questions ### Is Oppo Reno 3 Pro Clone free to download? Yes, Oppo Reno 3 Pro Clone can be downloaded free of charge from its web page. ### How large is the download? The Oppo Reno 3 Pro Clone package is 317 MB. ### Which tool do I need to flash Oppo Reno 3 Pro Clone? Oppo Reno 3 Pro Clone is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt). ### What Android version is Oppo Reno 3 Pro Clone? This firmware is Android 4.4 (KitKat). ### Which devices is this firmware for? This file is intended for Oppo devices. Always confirm it matches your specific model before flashing. ## More Oppo files - [Oppo X7S Clone](https://www.filefirmware.com/file/oppo-x7s-clone-110229) — 466 MB - [Oppo Watch OW19W8AP](https://www.filefirmware.com/file/oppo-watch-ow19w8ap-110228) — 861 MB - [Oppo X5 Clone](https://www.filefirmware.com/file/oppo-x5-clone-110225) — 454 MB - [Oppo Watch OW19W6AP](https://www.filefirmware.com/file/oppo-watch-ow19w6ap-110224) — 861 MB - [Oppo Rino 3 Clone](https://www.filefirmware.com/file/oppo-rino-3-clone-110222) — 396 MB - [Oppo Reno Z CPH1979](https://www.filefirmware.com/file/oppo-reno-z-cph1979-110221) — 6 GB - [Oppo Reno Ace PCLM10](https://www.filefirmware.com/file/oppo-reno-ace-pclm10-110220) — 4 GB - [Oppo Reno A CPH1983](https://www.filefirmware.com/file/oppo-reno-a-cph1983-110219) — 7 GB --- *Source: File Firmware — . Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*