OnePlus 3 Stock Firmware

About OnePlus 3 Stock Firmware

Here you will find all the latest OnePlus firmware for OnePlus 3. If you are looking for OnePlus 3 stock ROM firmware, then you are on the right page. Before downloading, make sure your device is OnePlus 3, if it is not, then flashing the below stock firmware can brick your device. The OnePlus 3 firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download OnePlus 3 Firmware File Name : OnePlus_3_MSM8996_160606.zip File Size : 1 GB Get Firmware File Name : OnePlus_3_MSM8996_160606_Boot_Repair.zip File Size : 1 GB Get Firmware File Name : OnePlus_3_MSM8996_16.A.55_GLO_055_170821_7.1.1.zip File Size : 1 GB Android OS Version : 7.1.1 Get Firmware Also: OnePlus X Stock Firmware How To Flash OnePlus 3 Stock Firmware Download and extract the OnePlus 3 firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the OnePlus 3 firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your OnePlus 3 device from the computer and restart the device. Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your OnePlus 3 device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U

File Details

How to flash OnePlus 3 Stock Firmware with QFIL

1. Confirm OnePlus 3 Stock Firmware matches your exact device model and that the phone uses the MSM8996 chipset.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (1 GB) using the button above and extract it on a Windows PC.
4. Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
5. In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
6. Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
7. Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.

Guides for this firmware

• How to Fix QFIL Sahara Fail ErrorThe Sahara Fail error in QFIL occurs when the initial communication between the computer and the Qualcomm device fails. This prevents the tool from uploading the Firehose programmer, which is…
• How to Use QFIL: Qualcomm Firmware Flashing GuideQFIL (Qualcomm Flash Image Loader) is a specialized software tool used to flash stock firmware onto devices powered by Qualcomm chipsets. It is part of the Qualcomm QPST (Qualcomm Product Support…

Frequently asked questions

Is OnePlus 3 Stock Firmware free to download?

Yes, OnePlus 3 Stock Firmware can be downloaded free of charge from this page.

How large is the download?

The OnePlus 3 Stock Firmware package is 1 GB.

Which tool do I need to flash OnePlus 3 Stock Firmware?

OnePlus 3 Stock Firmware is Qualcomm MSM8996 firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.

Which devices is this firmware for?

This file is intended for OnePlus devices. Always confirm it matches your specific model before flashing.