Nokia 3.2 TA-1156
Nokia 3.2 TA-1156 is a Nokia firmware file listed under Nokia, distributed as Nokia_3.2_TA-1156_HMDSW_DPL_015B-0-00WW-B01_QFIL.zip with a download size of 1 GB. It is built for Qualcomm-based devices. It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. This page has been viewed 13 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Nokia 3.2 TA-1156
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Nokia 3.2 TA-1156 owners, this page hosts the original Nokia stock ROM and the key file details. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Nokia 3.2 TA-1156 back to square one. File Name: Nokia_3.2_TA-1156_HMDSW_DPL_015B-0-00WW-B01_QFIL.zip File Size: 1 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. With the stock ROM back in place, the Nokia 3.2 TA-1156 returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Nokia 3.2 TA-1156 |
|---|---|
| Package | Nokia_3.2_TA-1156_HMDSW_DPL_015B-0-00WW-B01_QFIL.zip |
| Brand / Platform | Nokia |
| Category | Nokia |
| Platform | Qualcomm |
| Flash tool | QFIL (part of Qualcomm QPST) |
| Package format | ZIP archive |
| File size | 1 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Nokia 3.2 TA-1156 with QFIL
- Confirm Nokia 3.2 TA-1156 matches your exact device model and that it is intended for Nokia hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1 GB) using the button above and extract it on a Windows PC.
- Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
- In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
- Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
- Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.
Guides for this firmware
- How to Get Qualcomm Phones into EDL Mode for QFILTo get a Qualcomm-based phone into EDL (Emergency Download) mode for QFIL, you must trigger a specific boot state that allows the device to be recognized by your PC as a "Qualcomm HS-USB QDLoader…
- How to Fix QFIL Sahara Fail ErrorThe Sahara Fail error in QFIL occurs when the initial communication between the computer and the Qualcomm device fails. This prevents the tool from uploading the Firehose programmer, which is…
- How to Use QFIL: Qualcomm Firmware Flashing GuideQFIL (Qualcomm Flash Image Loader) is a specialized software tool used to flash stock firmware onto devices powered by Qualcomm chipsets. It is part of the Qualcomm QPST (Qualcomm Product Support…
Frequently asked questions
Is Nokia 3.2 TA-1156 free to download?
Yes, Nokia 3.2 TA-1156 can be downloaded free of charge from this page.
How large is the download?
The Nokia 3.2 TA-1156 package is 1 GB.
Which tool do I need to flash Nokia 3.2 TA-1156?
Nokia 3.2 TA-1156 is Qualcomm firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.
Which devices is this firmware for?
This file is intended for Nokia devices. Always confirm it matches your specific model before flashing.