Nokia 3.1 Plus TA-1118
Nokia 3.1 Plus TA-1118 is a Nokia firmware file listed under Nokia, distributed as Nokia_3.1_Plus_TA-1118_MT6762_ROO-130C-0-00CN-B04_ROM.zip with a download size of 1.76 GB. It is built for the MediaTek MT6762 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 7 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Nokia 3.1 Plus TA-1118
The Nokia 3.1 Plus TA-1118 runs on Nokia's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Nokia 3.1 Plus TA-1118 a fresh start without the clutter that builds up over time. File Name: Nokia_3.1_Plus_TA-1118_MT6762_ROO-130C-0-00CN-B04_ROM.zip File Size: 1.76 GB Back up your files, charge the Nokia 3.1 Plus TA-1118 past 50 percent, install the matching drivers, and only then begin. Once installed, your Nokia 3.1 Plus TA-1118 should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Nokia 3.1 Plus TA-1118 |
|---|---|
| Package | Nokia_3.1_Plus_TA-1118_MT6762_ROO-130C-0-00CN-B04_ROM.zip |
| Brand / Platform | Nokia |
| Category | Nokia |
| Chipset | MediaTek MT6762 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1.76 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Nokia 3.1 Plus TA-1118 with SP Flash Tool
- Confirm Nokia 3.1 Plus TA-1118 matches your exact device model and that the phone uses the MT6762 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.76 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Nokia 3.1 Plus TA-1118 free to download?
Yes, Nokia 3.1 Plus TA-1118 can be downloaded free of charge from this page.
How large is the download?
The Nokia 3.1 Plus TA-1118 package is 1.76 GB.
Which tool do I need to flash Nokia 3.1 Plus TA-1118?
Nokia 3.1 Plus TA-1118 is MediaTek MT6762 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Nokia devices. Always confirm it matches your specific model before flashing.