Nokia 2V TA-1136
Nokia 2V TA-1136 is a Nokia firmware file listed under Nokia, distributed as Nokia_2V_TA-1136_EVW-0440-0-00WW-B01_ROM_9008_XML_QPST.zip with a download size of 882 MB. It is built for Qualcomm-based devices. It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. This page has been viewed 7 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Nokia 2V TA-1136
The Nokia 2V TA-1136 runs on Nokia's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Nokia_2V_TA-1136_EVW-0440-0-00WW-B01_ROM_9008_XML_QPST.zip File Size: 882 MB Back up your files, charge the Nokia 2V TA-1136 past 50 percent, install the matching drivers, and only then begin. After flashing, allow a few minutes for the first boot. From there the Nokia 2V TA-1136 should run like a brand new unit.
File Details
| File name | Nokia 2V TA-1136 |
|---|---|
| Package | Nokia_2V_TA-1136_EVW-0440-0-00WW-B01_ROM_9008_XML_QPST.zip |
| Brand / Platform | Nokia |
| Category | Nokia |
| Platform | Qualcomm |
| Flash tool | QFIL (part of Qualcomm QPST) |
| Package format | ZIP archive |
| File size | 882 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Nokia 2V TA-1136 with QFIL
- Confirm Nokia 2V TA-1136 matches your exact device model and that it is intended for Nokia hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (882 MB) using the button above and extract it on a Windows PC.
- Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
- In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
- Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
- Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.
Guides for this firmware
- How to Get Qualcomm Phones into EDL Mode for QFILTo get a Qualcomm-based phone into EDL (Emergency Download) mode for QFIL, you must trigger a specific boot state that allows the device to be recognized by your PC as a "Qualcomm HS-USB QDLoader…
- How to Fix QFIL Sahara Fail ErrorThe Sahara Fail error in QFIL occurs when the initial communication between the computer and the Qualcomm device fails. This prevents the tool from uploading the Firehose programmer, which is…
- How to Use QFIL: Qualcomm Firmware Flashing GuideQFIL (Qualcomm Flash Image Loader) is a specialized software tool used to flash stock firmware onto devices powered by Qualcomm chipsets. It is part of the Qualcomm QPST (Qualcomm Product Support…
Frequently asked questions
Is Nokia 2V TA-1136 free to download?
Yes, Nokia 2V TA-1136 can be downloaded free of charge from this page.
How large is the download?
The Nokia 2V TA-1136 package is 882 MB.
Which tool do I need to flash Nokia 2V TA-1136?
Nokia 2V TA-1136 is Qualcomm firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.
Which devices is this firmware for?
This file is intended for Nokia devices. Always confirm it matches your specific model before flashing.