Motorola Moto M Dual XT1662
Motorola Moto M Dual XT1662 is a Motorola firmware file listed under Motorola, distributed as Motorola_Moto_M_Dual_XT1662_MT6755_China_S0747_161108_6.0.zip with a download size of 1 GB. It is built for the MediaTek MT6755 chipset and runs Android 6.0 (Marshmallow). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 16 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Motorola Moto M Dual XT1662
If your Motorola Moto M Dual XT1662 has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Motorola flash package along with the details to check before you begin. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Motorola_Moto_M_Dual_XT1662_MT6755_China_S0747_161108_6.0.zip File Size: 1 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. With the stock ROM back in place, the Motorola Moto M Dual XT1662 returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Motorola Moto M Dual XT1662 |
|---|---|
| Package | Motorola_Moto_M_Dual_XT1662_MT6755_China_S0747_161108_6.0.zip |
| Brand / Platform | Motorola |
| Category | Motorola |
| Chipset | MediaTek MT6755 |
| Android version | Android 6.0 (Marshmallow) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Motorola Moto M Dual XT1662 with SP Flash Tool
- Confirm Motorola Moto M Dual XT1662 matches your exact device model and that the phone uses the MT6755 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Motorola Moto M Dual XT1662 free to download?
Yes, Motorola Moto M Dual XT1662 can be downloaded free of charge from this page.
How large is the download?
The Motorola Moto M Dual XT1662 package is 1 GB.
Which tool do I need to flash Motorola Moto M Dual XT1662?
Motorola Moto M Dual XT1662 is MediaTek MT6755 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Motorola Moto M Dual XT1662?
This firmware is Android 6.0 (Marshmallow).
Which devices is this firmware for?
This file is intended for Motorola devices. Always confirm it matches your specific model before flashing.