Motorola

Motorola Moto E7i Power XT2097-13

Motorola_Moto_E7i_Power_XT2097-13_MALTA_L_TIM_IT_10_QOJ30.302-5_2104_20210401_SIGN_008_SPD.zip
June 16, 2026 Motorola 1.5 GB Motorola

Motorola Moto E7i Power XT2097-13 is a Motorola firmware file listed under Motorola, distributed as Motorola_Moto_E7i_Power_XT2097-13_MALTA_L_TIM_IT_10_QOJ30.302-5_2104_20210401_SIGN_008_SPD.zip with a download size of 1.5 GB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of April 01, 2021. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 17 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1.5 GB
Download Free

About Motorola Moto E7i Power XT2097-13

Looking for the official stock firmware for your Motorola Moto E7i Power XT2097-13? You're in the right place. Below is the original Motorola flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Motorola Moto E7i Power XT2097-13 a fresh start without the clutter that builds up over time. File Name: Motorola_Moto_E7i_Power_XT2097-13_MALTA_L_TIM_IT_10_QOJ30.302-5_2104_20210401_SIGN_008_SPD.zip File Size: 1.5 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. When it finishes, the Motorola Moto E7i Power XT2097-13 restarts with clean factory software. Match the firmware to your variant and follow each step in order.

File Details

File nameMotorola Moto E7i Power XT2097-13
PackageMotorola_Moto_E7i_Power_XT2097-13_MALTA_L_TIM_IT_10_QOJ30.302-5_2104_20210401_SIGN_008_SPD.zip
Brand / PlatformMotorola
CategoryMotorola
PlatformUnisoc (Spreadtrum)
Build dateApril 01, 2021
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size1.5 GB
Date addedJune 16, 2026
PriceFree

How to flash Motorola Moto E7i Power XT2097-13 with SPD ResearchDownload

  1. Confirm Motorola Moto E7i Power XT2097-13 matches your exact device model and that it is intended for Motorola hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1.5 GB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Motorola Moto E7i Power XT2097-13 free to download?

Yes, Motorola Moto E7i Power XT2097-13 can be downloaded free of charge from this page.

How large is the download?

The Motorola Moto E7i Power XT2097-13 package is 1.5 GB.

Which tool do I need to flash Motorola Moto E7i Power XT2097-13?

Motorola Moto E7i Power XT2097-13 is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Motorola devices. Always confirm it matches your specific model before flashing.

More Motorola files

Back to Motorola