Motorola

Motorola Moto E7i Power XT2097-12

Motorola_Moto_E7i_Power_XT2097-12_MALTA_L_OPENCL_10_QOJ30.303-8_2104_20210425_SIGN_010_SPD.zip
June 16, 2026 Motorola 1.5 GB Motorola

Motorola Moto E7i Power XT2097-12 is a Motorola firmware file listed under Motorola, distributed as Motorola_Moto_E7i_Power_XT2097-12_MALTA_L_OPENCL_10_QOJ30.303-8_2104_20210425_SIGN_010_SPD.zip with a download size of 1.5 GB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of April 25, 2021. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 12 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1.5 GB
Download Free

About Motorola Moto E7i Power XT2097-12

Sometimes a clean firmware install is the best fix for a misbehaving phone. For Motorola Moto E7i Power XT2097-12 owners, this page hosts the original Motorola stock ROM and the key file details. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Motorola Moto E7i Power XT2097-12 back to square one. File Name: Motorola_Moto_E7i_Power_XT2097-12_MALTA_L_OPENCL_10_QOJ30.303-8_2104_20210425_SIGN_010_SPD.zip File Size: 1.5 GB Back up your files, charge the Motorola Moto E7i Power XT2097-12 past 50 percent, install the matching drivers, and only then begin. With the stock ROM back in place, the Motorola Moto E7i Power XT2097-12 returns to factory state. If something fails, verify the file matches your model and retry.

File Details

File nameMotorola Moto E7i Power XT2097-12
PackageMotorola_Moto_E7i_Power_XT2097-12_MALTA_L_OPENCL_10_QOJ30.303-8_2104_20210425_SIGN_010_SPD.zip
Brand / PlatformMotorola
CategoryMotorola
PlatformUnisoc (Spreadtrum)
Build dateApril 25, 2021
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size1.5 GB
Date addedJune 16, 2026
PriceFree

How to flash Motorola Moto E7i Power XT2097-12 with SPD ResearchDownload

  1. Confirm Motorola Moto E7i Power XT2097-12 matches your exact device model and that it is intended for Motorola hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1.5 GB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Motorola Moto E7i Power XT2097-12 free to download?

Yes, Motorola Moto E7i Power XT2097-12 can be downloaded free of charge from this page.

How large is the download?

The Motorola Moto E7i Power XT2097-12 package is 1.5 GB.

Which tool do I need to flash Motorola Moto E7i Power XT2097-12?

Motorola Moto E7i Power XT2097-12 is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Motorola devices. Always confirm it matches your specific model before flashing.

More Motorola files

Back to Motorola