Motorola

Motorola Moto E7 Power XT-2097-6

Motorola_Moto_E7_Power_XT-2097-6_MT6765_QOLS30.288-39-2_2109_210914_SIGN_019_SVC.zip
June 16, 2026 Motorola 3.98 GB Motorola

Motorola Moto E7 Power XT-2097-6 is a Motorola firmware file listed under Motorola, distributed as Motorola_Moto_E7_Power_XT-2097-6_MT6765_QOLS30.288-39-2_2109_210914_SIGN_019_SVC.zip with a download size of 3.98 GB. It is built for the MediaTek MT6765 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 6 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
3.98 GB
Download Free

About Motorola Moto E7 Power XT-2097-6

If your Motorola Moto E7 Power XT-2097-6 has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Motorola flash package along with the details to check before you begin. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Motorola Moto E7 Power XT-2097-6 a fresh start without the clutter that builds up over time. File Name: Motorola_Moto_E7_Power_XT-2097-6_MT6765_QOLS30.288-39-2_2109_210914_SIGN_019_SVC.zip File Size: 3.98 GB Back up your files, charge the Motorola Moto E7 Power XT-2097-6 past 50 percent, install the matching drivers, and only then begin. When it finishes, the Motorola Moto E7 Power XT-2097-6 restarts with clean factory software. Match the firmware to your variant and follow each step in order.

File Details

File nameMotorola Moto E7 Power XT-2097-6
PackageMotorola_Moto_E7_Power_XT-2097-6_MT6765_QOLS30.288-39-2_2109_210914_SIGN_019_SVC.zip
Brand / PlatformMotorola
CategoryMotorola
ChipsetMediaTek MT6765
Flash toolSP Flash Tool
Package formatZIP archive
File size3.98 GB
Date addedJune 16, 2026
PriceFree

How to flash Motorola Moto E7 Power XT-2097-6 with SP Flash Tool

  1. Confirm Motorola Moto E7 Power XT-2097-6 matches your exact device model and that the phone uses the MT6765 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (3.98 GB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Motorola Moto E7 Power XT-2097-6 free to download?

Yes, Motorola Moto E7 Power XT-2097-6 can be downloaded free of charge from this page.

How large is the download?

The Motorola Moto E7 Power XT-2097-6 package is 3.98 GB.

Which tool do I need to flash Motorola Moto E7 Power XT-2097-6?

Motorola Moto E7 Power XT-2097-6 is MediaTek MT6765 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for Motorola devices. Always confirm it matches your specific model before flashing.

More Motorola files

Back to Motorola