Motorola Moto E6S XT2053-3
Motorola Moto E6S XT2053-3 is a Motorola firmware file listed under Motorola, distributed as Motorola_Moto_E6S_XT2053-3_MT6765_POKERP_RETAPAC_P160CN_PVT_9.0_LNV_64B_CFC_239.01-01_FLASH_SIGN_SVC.zip with a download size of 1.5 GB. It is built for the MediaTek MT6765 chipset and runs Android 9 (Pie). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 16 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Motorola Moto E6S XT2053-3
Looking for the official stock firmware for your Motorola Moto E6S XT2053-3? You're in the right place. Below is the original Motorola flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Motorola Moto E6S XT2053-3 back to square one. File Name: Motorola_Moto_E6S_XT2053-3_MT6765_POKERP_RETAPAC_P160CN_PVT_9.0_LNV_64B_CFC_239.01-01_FLASH_SIGN_SVC.zip File Size: 1.5 GB Back up your files, charge the Motorola Moto E6S XT2053-3 past 50 percent, install the matching drivers, and only then begin. With the stock ROM back in place, the Motorola Moto E6S XT2053-3 returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Motorola Moto E6S XT2053-3 |
|---|---|
| Package | Motorola_Moto_E6S_XT2053-3_MT6765_POKERP_RETAPAC_P160CN_PVT_9.0_LNV_64B_CFC_239.01-01_FLASH_SIGN_SVC.zip |
| Brand / Platform | Motorola |
| Category | Motorola |
| Chipset | MediaTek MT6765 |
| Android version | Android 9 (Pie) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1.5 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Motorola Moto E6S XT2053-3 with SP Flash Tool
- Confirm Motorola Moto E6S XT2053-3 matches your exact device model and that the phone uses the MT6765 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.5 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6765 Firmware Guide: Tools and Flashing InstructionsThe MT6765 is a MediaTek chipset used across a wide variety of budget and mid-range Android devices. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Motorola Moto E6S XT2053-3 free to download?
Yes, Motorola Moto E6S XT2053-3 can be downloaded free of charge from this page.
How large is the download?
The Motorola Moto E6S XT2053-3 package is 1.5 GB.
Which tool do I need to flash Motorola Moto E6S XT2053-3?
Motorola Moto E6S XT2053-3 is MediaTek MT6765 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Motorola Moto E6S XT2053-3?
This firmware is Android 9 (Pie).
Which devices is this firmware for?
This file is intended for Motorola devices. Always confirm it matches your specific model before flashing.