Motorola

Motorola Moto E6i XT2053-5

Motorola_Moto_E6i_XT2053-5_FIJISC_RETBR_10_QOH30.191-6_2102_20210204_Sign_010_10_SPD.zip
June 16, 2026 Motorola 1.49 GB Motorola

Motorola Moto E6i XT2053-5 is a Motorola firmware file listed under Motorola, distributed as Motorola_Moto_E6i_XT2053-5_FIJISC_RETBR_10_QOH30.191-6_2102_20210204_Sign_010_10_SPD.zip with a download size of 1.49 GB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of February 04, 2021. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 18 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1.49 GB
Download Free

About Motorola Moto E6i XT2053-5

The Motorola Moto E6i XT2053-5 runs on Motorola's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Motorola_Moto_E6i_XT2053-5_FIJISC_RETBR_10_QOH30.191-6_2102_20210204_Sign_010_10_SPD.zip File Size: 1.49 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. When it finishes, the Motorola Moto E6i XT2053-5 restarts with clean factory software. Match the firmware to your variant and follow each step in order.

File Details

File nameMotorola Moto E6i XT2053-5
PackageMotorola_Moto_E6i_XT2053-5_FIJISC_RETBR_10_QOH30.191-6_2102_20210204_Sign_010_10_SPD.zip
Brand / PlatformMotorola
CategoryMotorola
PlatformUnisoc (Spreadtrum)
Build dateFebruary 04, 2021
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size1.49 GB
Date addedJune 16, 2026
PriceFree

How to flash Motorola Moto E6i XT2053-5 with SPD ResearchDownload

  1. Confirm Motorola Moto E6i XT2053-5 matches your exact device model and that it is intended for Motorola hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1.49 GB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Motorola Moto E6i XT2053-5 free to download?

Yes, Motorola Moto E6i XT2053-5 can be downloaded free of charge from this page.

How large is the download?

The Motorola Moto E6i XT2053-5 package is 1.49 GB.

Which tool do I need to flash Motorola Moto E6i XT2053-5?

Motorola Moto E6i XT2053-5 is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Motorola devices. Always confirm it matches your specific model before flashing.

More Motorola files

Back to Motorola